Paper Quilled Butterflies: Step-by-Step Guide

Updated November 17, 2026

Jump to recipe

Paper quilling is the art of rolling, shaping, and gluing thin strips of paper to create decorative designs. A quilled butterfly makes a lovely handmade card topper, gift tag, or wall art piece. This guide will walk you through making a simple two-wing butterfly using basic quilling tools, with clear steps for beginners and tips for more polished results.

What You’ll Need

  • Quilling strips (1/8 inch or 3 mm wide) in two or three colors – about 12 strips per butterfly
  • Quilling needle tool (or a toothpick with a slit cut in the end)
  • Circle template or ruler with circles (to size coils)
  • White craft glue (PVA) and a toothpick for applying it
  • Wax paper or a silicone mat to work on (prevents sticking)
  • Scissors
  • Tweezers (optional but helpful)
  • A pin or fine needle to apply glue

Step-by-Step

  1. Prepare your strips. Cut each quilling strip to your desired length. For a medium butterfly (about 2 inches wide), use full 6-inch strips for the upper wings and half strips for the lower wings. If you want a larger butterfly, you can glue two strips together end-to-end before rolling.
  2. Make the upper wing coils. Insert one end of a strip into the slot of your quilling tool. Roll the paper tightly around the tool, keeping the edges even. When you reach the end, remove the coil from the tool and place it into a circle template hole that is about 0.5 inches (13 mm) in diameter. Let it loosen to fill the circle, then remove and glue the loose end down with a tiny dab of glue. This creates a loose closed coil. Make two identical coils for the upper wings.
  3. Shape the upper wings. Pinch one side of each coil between your thumb and forefinger to create a teardrop shape. The pointed end will be the wing tip. Set them aside to dry.
  4. Make the lower wing coils. Use a half strip (about 3 inches) for each lower wing. Roll them into loose coils using the same method, but let them loosen to a smaller circle (about 0.4 inches / 10 mm). Shape these into teardrops as well, but pinch them slightly less to make them rounder.
  5. Create the body. Take a full strip of a contrasting color (like dark brown or black). Roll it into a tight coil without letting it loosen. Glue the end. This will be the butterfly’s head and thorax. You can also make a second, slightly larger tight coil for the abdomen if you want a longer body.
  6. Assemble the wings. On your wax paper, arrange the two upper wing teardrops side by side with the points facing outward. Place the two lower wing teardrops just below them, with the points also facing outward. The rounded ends should meet in the center. Apply a small amount of glue to the touching edges and press them together gently. Let the glue dry for a few minutes.
  7. Attach the body. Place the tight coil (body) over the center where the wings meet. Glue it down. If you made a separate abdomen, glue it just below the thorax coil.
  8. Add antennae. Cut two thin strips of paper, about 1 inch (2.5 cm) long. Roll one end of each strip around the quilling tool to make a tiny curl. Glue the uncurled end to the top of the head coil, curving them outward like antennae.
  9. Let the butterfly dry completely. Allow at least 30 minutes for the glue to set. Once dry, you can gently lift the butterfly off the wax paper and use it as desired.

Common Mistakes

  • Coils too tight or too loose. If you don’t let the coil loosen enough, the butterfly will look stiff. If you let it loosen too much, the shape will be floppy. Use the circle template to ensure consistency.
  • Using too much glue. Excess glue creates visible smudges and makes the paper wrinkle. Use a toothpick to apply tiny dots.
  • Not pinching evenly. When making teardrops, pinch gently and evenly to avoid a lopsided wing.
  • Strips not centered. When rolling, keep the strip aligned so the edges are flush; otherwise, the coil will be uneven.

Tips

  • Use a quilling coach (a plastic tool with multiple circle sizes) to keep all coils uniform.
  • For a more realistic butterfly, use two shades of the same color – a darker shade for the lower wings.
  • If you don’t have a quilling tool, cut a small slit in the end of a round toothpick.
  • To make the butterfly more durable, apply a thin coat of white glue diluted with water over the finished piece and let it dry.
  • Experiment with different shapes: instead of teardrops, try a “eye” shape (pinch both ends) for the lower wings.

Troubleshooting

  • My coil won’t loosen. If the coil stays tight, it may be because you rolled it too tightly or the glue dried too quickly. Try using a looser roll and let it sit for a few seconds before placing it in the template.
  • The wings won’t stick together. Make sure the surfaces are clean and apply a small amount of glue to both edges. Press and hold for 10-15 seconds. If the glue is too dry, use a fresh dab.
  • The butterfly is floppy. This usually means the coils are too loose. Re-roll the strips, using a smaller circle in the template, or add a second strip glued end-to-end to make the coil thicker.
  • Paper tears. If the strip tears while rolling, it may be too thin or too dry. Try a new strip and roll more gently. You can also lightly dampen the strip with a damp cloth to make it more pliable.
  • Glue shows. Use less glue and wipe away any excess immediately with a damp cotton swab.

Frequently Asked Questions

Q: What type of paper is best for quilling?
Use acid-free quilling paper, which is usually 80-120 gsm. You can also cut your own strips from lightweight cardstock, but pre-cut strips are more consistent.

Q: How long does it take to make one butterfly?
For a beginner, it might take 20-30 minutes per butterfly. With practice, you can make one in under 10 minutes.

Q: Can I use a glue stick instead of liquid glue?
Glue sticks are not ideal because they don’t hold as well and can make the paper curl. White PVA glue is the standard choice.

Q: How do I make a larger butterfly?
Use longer strips (glue two strips together) and let the coils loosen to a larger size in the template. You may also need to use thicker paper.

Q: Can I make a butterfly without a quilling tool?
Yes, you can use a toothpick with a slit, or even a bamboo skewer. The key is to roll tightly and evenly.

Q: How do I store finished quilled butterflies?
Store them flat in a box with layers of tissue paper between them. Avoid crushing them.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).