White Rice Peeling Ampoule 100ml: DIY Korean Skincare Recipe

Updated November 21, 2026

Total time
2 hr 15 min
prep 15 min · cook 0 min
Serves
20
portions as written

Jump to recipe

This DIY white rice peeling ampoule is a Korean-inspired exfoliating treatment that gently buffs away dead skin cells while brightening and softening your complexion. Made with fermented rice water, a touch of lactic acid, and soothing botanicals, this 100ml ampoule delivers the benefits of a professional peel in a gentle, at-home format. It works by combining mild chemical exfoliation with the nourishing properties of rice, leaving skin smooth, radiant, and hydrated.

Ingredients

  • 1/2 cup (100 g) white rice (short-grain or jasmine)
  • 1 cup (240 ml) distilled water (for rice water)
  • 1/4 cup (60 ml) rice water (from above)
  • 2 tablespoons (30 ml) vegetable glycerin (humectant)
  • 1 tablespoon (15 ml) lactic acid (5% solution, or use 1 teaspoon of 80% lactic acid powder dissolved in 2 tbsp water)
  • 1 teaspoon (5 ml) panthenol (vitamin B5) or aloe vera gel (soothing)
  • 1/4 teaspoon (1.2 ml) xanthan gum (thickener, optional for serum-like texture)
  • 5 drops of grapefruit seed extract (preservative) or 1 ml of liquid preservative (e.g., phenoxyethanol)
  • 4-5 drops of lavender or tea tree essential oil (optional, for scent and antibacterial properties)

Instructions

  1. Prepare the rice water: Rinse 1/2 cup (100 g) white rice under cold water to remove surface starch. Place the rice in a bowl, add 1 cup (240 ml) distilled water, and let it soak for 30 minutes. Stir occasionally. After soaking, strain the liquid into a clean bowl. This is your fermented rice water (you can let it ferment for 24 hours at room temperature for extra benefits, but if you do, refrigerate it and use within 3 days).
  2. Measure the base: Measure 1/4 cup (60 ml) of the rice water and pour it into a small mixing bowl. If you want a thicker, serum-like consistency, whisk in 1/4 teaspoon (1.2 ml) xanthan gum slowly to avoid clumps. Let it hydrate for 5 minutes.
  3. Add humectants and actives: Stir in the vegetable glycerin and panthenol (or aloe vera gel) until fully incorporated.
  4. Incorporate the exfoliant: Add the lactic acid solution. If using lactic acid powder, dissolve it in 2 tablespoons (30 ml) of distilled water first, then add. Stir well. The mixture will have a slightly acidic pH (around 4-5), which is ideal for exfoliation.
  5. Preserve and scent (optional): Add the grapefruit seed extract or liquid preservative to prevent microbial growth. If using essential oils, add them now. Stir thoroughly to combine.
  6. Bottle and store: Transfer the ampoule to a clean, dark glass bottle with a dropper or pump. Label it with the date. Store in the refrigerator to extend shelf life.
  7. Patch test: Before first use, apply a small amount to your inner arm and wait 24 hours to check for any adverse reaction.

Tips

  • Substitutions: If you don’t have lactic acid, you can use 1 tablespoon (15 ml) of lemon juice (though it’s more irritating) or 1 tablespoon (15 ml) of apple cider vinegar (diluted). These will change the pH and may sting; always patch test.
  • Storage: Because this is a water-based product without a strong preservative, keep it refrigerated and use within 2 weeks. For longer storage, use a broad-spectrum preservative like phenoxyethanol (follow manufacturer’s dosage).
  • Common mistake: Do not use more than 5% lactic acid in a DIY product; higher concentrations can cause chemical burns. Also, never apply this ampoule to broken or irritated skin.
  • Fermentation: If you want a more potent product, let the rice water ferment for 24 hours at room temperature before using. This increases the concentration of beneficial enzymes and vitamins, but it also makes the product more perishable—use within 3 days.

Serving Suggestions

Use this ampoule as a treatment serum in your evening skincare routine. After cleansing and toning, apply 3-4 drops to your face and neck, gently pressing it into the skin. Follow with a moisturizer to lock in hydration. Use it 2-3 times a week, not daily, to avoid over-exfoliation. It pairs well with a hydrating sheet mask afterward for an extra glow.

Variations

  • Brightening Boost: Add 1/2 teaspoon (2.5 ml) of niacinamide powder to the mixture to enhance skin brightening and reduce redness.
  • Anti-Aging: Replace the lactic acid with 1 tablespoon (15 ml) of glycolic acid (10% solution) for a stronger peel, but reduce frequency to once a week.
  • Soothing Version: Omit the lactic acid and add 1 tablespoon (15 ml) of green tea extract for a calming, antioxidant-rich essence suitable for sensitive skin.

Storage and Reheating

This ampoule is not meant to be reheated—heat will degrade the active ingredients. Store it in the refrigerator at all times. It will keep for up to 2 weeks when refrigerated. If you notice a change in color, smell, or texture, discard it immediately. Do not freeze, as this can separate the ingredients. For optimal freshness, make small batches (like this one) and use it within the recommended time.

Frequently Asked Questions

Can I use this ampoule every day? No, daily use can strip your skin’s natural barrier. Start with 2 times a week, and if your skin tolerates it well, you can increase to 3 times a week. Always listen to your skin—if it feels tight or irritated, reduce frequency.

How long does the ampoule last? When refrigerated, it should last up to 2 weeks. Because it’s a DIY product without a strong preservative, it’s best to make small batches and use them quickly. If you use a preservative like phenoxyethanol, you can extend the shelf life to 1 month.

Can I use this if I have sensitive skin? Yes, but with caution. The lactic acid concentration is low (5%), but it can still cause irritation. Patch test first, and if you experience redness or burning, dilute it with more glycerin or aloe vera gel. You can also skip the lactic acid entirely for a gentler rice water essence.

What is the pH of this ampoule? The pH should be around 4-5, which is ideal for exfoliating acids to work effectively. If you want to check, use pH test strips. If it’s too high (above 5), add a tiny bit more lactic acid; if too low (below 3), add a pinch of baking soda to raise it.

Can I use this on my body? Absolutely! It works well on rough areas like elbows and knees. Apply it after showering and follow with a body lotion. Avoid using it on broken skin or active acne lesions.

Is this safe during pregnancy? Lactic acid is generally considered safe in low concentrations during pregnancy, but always consult your healthcare provider first. Avoid essential oils like lavender or tea tree if you are pregnant, as some are not recommended.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).