Fish Fry Green Bay: Classic Friday Night Recipe

Updated November 21, 2026

Total time
45 min
prep 25 min · cook 20 min
Serves
4
portions as written
Safe temperature (USDA)
145°F / 63°C
check the thickest piece

Jump to recipe

Fish fry is a beloved Friday night tradition in Green Bay, Wisconsin, where crispy, golden fried fish is served with coleslaw, rye bread, and lemon wedges. This recipe delivers that classic tavern-style fish fry at home using a simple beer batter and a hot pot of oil. The result is a light, crunchy coating that seals in the moisture of tender white fish, making it a satisfying and achievable meal for any home cook.

Ingredients

  • 1 ½ lbs (680 g) white fish fillets (cod, haddock, or walleye), skinless
  • 1 cup (125 g) all-purpose flour
  • 1 cup (240 ml) beer (lager or pilsner), cold
  • 1 teaspoon baking powder
  • 1 teaspoon salt, plus more for seasoning
  • ½ teaspoon black pepper
  • ½ teaspoon paprika (optional)
  • 4 cups (960 ml) vegetable or canola oil, for frying
  • Lemon wedges, for serving
  • Fresh parsley, chopped (optional, for garnish)

Instructions

  1. Pat the fish fillets dry with paper towels. Cut them into serving-sized pieces if they are large. Season lightly with salt and pepper.
  2. In a large bowl, whisk together the flour, baking powder, 1 teaspoon salt, black pepper, and paprika (if using). Slowly pour in the cold beer, whisking until the batter is smooth and free of lumps. The batter should be the consistency of thin pancake batter; if it seems too thick, add a tablespoon more beer.
  3. Pour the oil into a deep, heavy-bottomed pot or Dutch oven, ensuring it is no more than halfway full. Heat the oil over medium-high heat until it reaches 350°F (175°C) on a deep-fry thermometer.
  4. While the oil heats, set a wire rack over a baking sheet. This will be used to drain the fried fish.
  5. When the oil is hot, dip a few pieces of fish into the batter, letting the excess drip off. Carefully lower them into the hot oil. Do not overcrowd the pot; fry in batches of 3-4 pieces depending on the size of your pot.
  6. Fry the fish for 4-5 minutes per batch, turning occasionally, until the coating is deep golden brown and the fish flakes easily with a fork. The internal temperature of the fish should reach 145°F (63°C) as the safe minimum, checked with a food thermometer.
  7. Remove the fried fish with a slotted spoon or spider and transfer to the wire rack. Immediately sprinkle with a little salt. Repeat with the remaining fish, allowing the oil to return to 350°F (175°C) between batches.
  8. Serve hot with lemon wedges and your favorite sides.

Tips

  • Keep the batter cold: A cold batter helps create a crispier crust. Keep the beer in the fridge until you’re ready to mix, and if the batter sits for a while, set the bowl over another bowl of ice water.
  • Don’t overcrowd the pot: Adding too many pieces at once drops the oil temperature, leading to greasy, soggy fish. Fry in small batches and let the oil come back up to temperature between batches.
  • Choose the right fish: Firm white fish like cod, haddock, or walleye hold up well to frying. Avoid delicate fish like tilapia or sole, which can fall apart.
  • No beer? Use club soda: If you prefer not to use beer, substitute an equal amount of cold club soda or sparkling water. The carbonation still creates a light texture, though the flavor will be slightly less complex.

Serving Suggestions

In Green Bay, fish fry is traditionally served with tartar sauce, coleslaw, rye bread, and lemon wedges. You can also add French fries, potato pancakes, or a simple green salad. For a true Wisconsin touch, serve with a side of seasoned salt or malt vinegar.

Variations

  • Panko-crusted: For an extra-crunchy coating, dip the fish in the beer batter, then roll in panko breadcrumbs before frying.
  • Spicy version: Add 1 teaspoon of cayenne pepper or a few dashes of hot sauce to the batter for a kick.
  • Gluten-free: Use a gluten-free all-purpose flour blend and a gluten-free beer (or club soda) to make this dish gluten-free.
  • Baked alternative: For a lighter version, place the battered fish on a greased baking sheet and bake at 425°F (220°C) for 15-20 minutes, flipping halfway, until golden and cooked through.

Storage and Reheating

Leftover fried fish can be stored in an airtight container in the refrigerator for up to 3 days. To reheat, place the fish on a wire rack over a baking sheet and warm in a 350°F (175°C) oven for 8-10 minutes, or until heated through and crispy. Avoid microwaving, as it will make the coating soggy.

Frequently Asked Questions

What type of fish is best for a fish fry? Firm, mild white fish like cod, haddock, walleye, or perch are ideal. They have a mild flavor and hold their shape well during frying.

Can I use a different type of beer? Yes, any light lager or pilsner works well. Darker beers like stouts can add a bitter flavor, so it’s best to stick with lighter options.

How do I know when the oil is hot enough? Use a deep-fry thermometer to ensure the oil reaches 350°F (175°C). If you don’t have one, drop a small piece of bread into the oil; it should sizzle and turn golden brown in about 30 seconds.

Can I prepare the batter ahead of time? It’s best to make the batter fresh, as the baking powder loses its leavening power over time. If you must prepare it ahead, keep it refrigerated and use it within 1 hour.

Why is my fish greasy? Greasy fish usually means the oil wasn’t hot enough or the pot was overcrowded. Make sure the oil is at 350°F (175°C) before adding the fish, and fry in small batches.

Can I reuse the frying oil? Yes, you can strain the oil through a fine-mesh sieve and store it in a sealed container in the refrigerator for up to 1 month. Discard it if it smells rancid or becomes dark and foamy.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).