Fish fry Hartford is a New England classic: fresh white fish fillets coated in a seasoned cornmeal crust, fried until golden and crisp, and served with lemon wedges and tartar sauce. This recipe delivers that satisfying crunch with a light, flaky interior, using a simple technique that works for cod, haddock, or pollock. It’s a dependable weeknight dinner or a festive Friday fish fry that brings the flavors of a Connecticut shore dinner to your kitchen.
Ingredients
- 1 lb (450 g) skinless cod, haddock, or pollock fillets, cut into 4 portions
- 1 cup (125 g) all-purpose flour
- 1 cup (120 g) yellow cornmeal
- 1 tsp baking powder
- 1 tsp garlic powder
- 1 tsp paprika
- 1/2 tsp cayenne pepper (optional, for heat)
- 1 tsp salt
- 1/2 tsp black pepper
- 1 cup (240 ml) buttermilk
- 1 large egg
- Vegetable oil, for frying (about 2 cups / 480 ml)
- Lemon wedges, for serving
Instructions
- Pat the fish fillets dry with paper towels. If they are thicker than 1 inch (2.5 cm), slice them horizontally into thinner cutlets so they cook evenly.
- In a shallow dish, whisk together the flour, cornmeal, baking powder, garlic powder, paprika, cayenne (if using), salt, and black pepper.
- In a second shallow dish, whisk the buttermilk and egg until combined.
- Heat about 1/2 inch (1.25 cm) of vegetable oil in a large heavy skillet (cast iron works well) over medium-high heat until it reaches 350°F (175°C). If you don’t have a thermometer, test by dropping a pinch of flour into the oil; it should sizzle immediately.
- Working with one piece at a time, dip each fillet into the buttermilk mixture, letting the excess drip off, then coat thoroughly in the cornmeal mixture, pressing gently to adhere.
- Carefully place the coated fish into the hot oil, making sure not to overcrowd the pan (cook in batches if needed). Fry for 3–4 minutes per side, until golden brown and the fish flakes easily with a fork.
- Check the internal temperature with a food thermometer: the fish should reach 145°F (63°C), which is the USDA FSIS safe minimum for fish. If not, return to the oil for another minute.
- Transfer the fried fish to a wire rack set over a baking sheet to drain excess oil. Keep warm in a 200°F (95°C) oven while frying the remaining batches.
- Serve immediately with lemon wedges and tartar sauce.
Tips
- Substitutions: No buttermilk? Mix 1 cup (240 ml) milk with 1 tablespoon lemon juice and let sit for 5 minutes. For gluten-free, use 1:1 gluten-free flour blend in place of all-purpose flour.
- Don’t overcrowd the pan: Frying too many pieces at once lowers the oil temperature, resulting in soggy, greasy fish. Cook in batches and let the oil return to 350°F (175°C) between batches.
- Keep it crispy: Place fried fish on a wire rack rather than paper towels. Paper towels trap steam and soften the crust.
- Oil temperature matters: Use a thermometer to maintain 350°F (175°C). If the oil is too hot, the outside burns before the inside cooks; too cool, and the fish absorbs oil.
Serving Suggestions
Serve the fish fry Hartford with classic sides: French fries, coleslaw, or a simple green salad. Add a side of malt vinegar for drizzling, and offer tartar sauce or a squeeze of fresh lemon. For a true New England touch, serve with a side of clam chowder or cornbread.
Variations
- Beer batter: Replace the buttermilk and egg with 1 cup (240 ml) cold beer and 1 teaspoon baking powder for a lighter, airier crust.
- Herb crust: Add 1 tablespoon chopped fresh dill or parsley to the cornmeal mixture for a fresh flavor.
- Spicy version: Increase cayenne to 1 teaspoon and add 1/2 teaspoon chili powder for extra heat.
- Baked option: For a lighter version, place coated fish on a greased baking sheet, drizzle with 2 tablespoons oil, and bake at 425°F (220°C) for 12–15 minutes, flipping once, until fish reaches 145°F (63°C).
Storage and Reheating
Refrigerate leftover fried fish in an airtight container within 2 hours of cooking. It will keep for up to 3 days. To reheat, place on a baking sheet in a 375°F (190°C) oven for 8–10 minutes, or until heated through and crisp. Avoid microwaving, as it makes the crust soggy. For longer storage, freeze the fried fish on a baking sheet, then transfer to a freezer bag and freeze for up to 2 months. Reheat from frozen in a 400°F (200°C) oven for 15–18 minutes.
Frequently Asked Questions
Can I use frozen fish? Yes, but thaw it completely in the refrigerator overnight and pat it very dry before coating. Excess moisture will cause the coating to slide off.
What type of fish is best? Mild white fish like cod, haddock, pollock, or tilapia work best. They flake nicely and have a neutral flavor that lets the crispy coating shine.
Why did my coating fall off? Usually it’s because the fish was too wet or the oil wasn’t hot enough. Pat the fish dry, let the coating set for 5 minutes before frying, and ensure the oil is at 350°F (175°C).
Can I make this gluten-free? Absolutely. Use a gluten-free all-purpose flour blend in place of regular flour, and ensure your cornmeal is certified gluten-free if needed.
How do I know when the fish is done? The fish should be opaque and flake easily with a fork. For safety, use a food thermometer to confirm it reaches 145°F (63°C).
Can I reuse the frying oil? Yes, once cooled, strain it through a fine-mesh sieve to remove bits, and store in a sealed container in the refrigerator for up to 1 month. Discard if it smells off or becomes cloudy.
Related
- Bhel Puri Recipe (Indian Street Food)
- Air Fry Fish Fillets: Crispy in 12 Minutes
- Baked Kadai Paneer Recipe for a Crowd
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).