Fish Fry Janeville WI: Crispy Beer-Battered Recipe

Updated November 21, 2026

Total time
45 min
prep 25 min · cook 20 min
Serves
4
portions as written
Safe temperature (USDA)
145°F / 63°C
check the thickest piece

Jump to recipe

Friday fish fry is a beloved tradition in Wisconsin, and Janesville has its own take: a crispy, golden beer-battered cod served with rye bread, tartar sauce, and a wedge of lemon. This recipe recreates that supper-club favorite at home, using a light, bubbly batter that stays crunchy and a simple pan-frying method that works for any white fish. It’s a straightforward, satisfying meal that brings the Northwoods feel to your own kitchen.

Ingredients

  • 1 ½ lbs (680 g) cod fillets (or haddock, pollock, or walleye), cut into 4-ounce portions
  • 1 cup (125 g) all-purpose flour
  • 1 cup (125 g) cornstarch
  • 1 teaspoon baking powder
  • 1 teaspoon garlic powder
  • 1 teaspoon paprika
  • ½ teaspoon salt
  • ¼ teaspoon black pepper
  • 1 ½ cups (355 ml) cold beer (lager or pilsner, such as Miller High Life or Leinenkugel’s)
  • 1 large egg
  • Vegetable or canola oil, for frying (about 4 cups / 960 ml)
  • For serving: rye bread, tartar sauce, lemon wedges, malt vinegar, coleslaw

Instructions

  1. Pat the fish fillets dry with paper towels. If they are thicker than 1 inch, slice them into even portions so they cook uniformly. Season lightly with salt and pepper and set aside.
  2. In a large bowl, whisk together the flour, cornstarch, baking powder, garlic powder, paprika, salt, and black pepper. Make a well in the center.
  3. Pour the cold beer into the well and add the egg. Whisk until the batter is smooth and free of lumps. It should be the consistency of thin pancake batter—if it’s too thick, add a splash more beer. Let the batter rest for 10 minutes while the oil heats.
  4. Pour oil into a deep, heavy pot (like a Dutch oven) to a depth of 2 inches (5 cm). Heat over medium-high heat until it reaches 350°F (175°C) on a deep-fry thermometer. If you don’t have a thermometer, drop a tiny bit of batter in—it should sizzle and float to the surface immediately.
  5. Working in batches of 2–3 pieces, dip each fish fillet into the batter, letting the excess drip off. Carefully lower it into the hot oil. Fry for 4–5 minutes per side, turning once, until the batter is deep golden brown and the fish flakes easily with a fork. The internal temperature of the fish should reach 145°F (63°C), the USDA FSIS safe minimum for fish.
  6. Use a slotted spoon to transfer the fried fish to a wire rack set over a baking sheet. Keep warm in a 200°F (93°C) oven while you fry the remaining batches. Do not pile the fish on paper towels—that will make the crust soggy.
  7. Serve immediately with rye bread, tartar sauce, lemon wedges, and malt vinegar on the side.

Tips

  • Keep the beer ice-cold: The colder the batter, the crispier the crust. Chill the beer and even the flour mixture for 15 minutes before mixing if your kitchen is warm.
  • Don’t overcrowd the pot: Adding too many fillets at once drops the oil temperature, making the fish greasy. Fry in small batches and let the oil come back to 350°F (175°C) between batches.
  • Use a thermometer: Both for the oil and the fish. A clip-on deep-fry thermometer is essential; guessing leads to undercooked or burnt fish.
  • Substitute the fish: If cod is pricey, use frozen pollock or haddock—just thaw it completely and pat it very dry before battering. Avoid oily fish like salmon or tuna; they don’t hold up to frying.

Serving Suggestions

Serve the fish fry the classic Wisconsin way: with a slice of dark rye bread (buttered), a generous scoop of creamy coleslaw, and a side of French fries or potato pancakes. Offer tartar sauce, cocktail sauce, and malt vinegar on the table. A cold beer or a glass of iced tea pairs perfectly. For a full supper-club experience, start with a relish tray of pickles, olives, and raw vegetables.

Variations

  • Gluten-free: Replace the all-purpose flour with a 1:1 gluten-free flour blend and use gluten-free beer (or club soda). The texture will be slightly lighter but still crisp.
  • Spicy Cajun: Add 1 teaspoon of Cajun seasoning and ¼ teaspoon cayenne pepper to the dry ingredients. Serve with remoulade sauce instead of tartar.
  • Oven-baked: For a lighter version, place the battered fish on a greased baking sheet, drizzle with 2 tablespoons of oil, and bake at 425°F (220°C) for 15–18 minutes, flipping halfway. It won’t be as crunchy, but it’s a good weeknight shortcut.
  • Shrimp or chicken: The same batter works for large shrimp (fry 2–3 minutes) or chicken tenders (fry until 165°F / 74°C internal temperature).

Storage and Reheating

Leftover fish fry will keep in the refrigerator for up to 3 days, stored in an airtight container. To reheat, place the fish on a wire rack over a baking sheet and warm in a 375°F (190°C) oven for 8–10 minutes, until hot and crisp. Avoid the microwave—it will turn the crust rubbery. If you have a lot of leftovers, freeze the fried fish in a single layer on a baking sheet, then transfer to a freezer bag for up to 2 months. Reheat from frozen in a 400°F (200°C) oven for 12–15 minutes.

Frequently Asked Questions

Can I use non-alcoholic beer? Yes, but the batter will be slightly less airy. Non-alcoholic beer still contains carbonation, which helps create a light crust. If you prefer no beer at all, substitute cold club soda or sparkling water.

Why is my batter falling off the fish? Usually it’s because the fish is too wet. Pat the fillets completely dry before dipping. Also, make sure the oil is hot enough—if it’s below 350°F (175°C), the batter will absorb oil and slide off.

Can I make the batter ahead of time? You can mix the dry ingredients ahead, but add the beer and egg only right before frying. The leavening action of the baking powder and beer starts immediately, so a rested batter will be flat.

What’s the best fish for this recipe? Cod is the classic choice, but haddock, pollock, walleye, or even catfish work well. Look for firm, white, mild-flavored fish. Avoid thin fillets like flounder, which cook too quickly and fall apart.

How do I know when the fish is done? The batter should be deep golden brown, and the fish should flake easily with a fork. For accuracy, insert an instant-read thermometer into the thickest part—it should read 145°F (63°C).

Can I reuse the frying oil? Yes, if you strain it through a fine-mesh sieve to remove batter bits and store it in a sealed container in the fridge. Use it within a month for frying fish again, but don’t reuse it for desserts—it will carry a fishy flavor.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).