Fish Fry Lake Geneva WI: Crispy Beer-Battered Recipe

Updated November 21, 2026

Total time
35 min
prep 20 min · cook 15 min
Serves
4
portions as written
Safe temperature (USDA)
145°F / 63°C
check the thickest piece

Jump to recipe

This Fish Fry Lake Geneva WI recipe brings the classic Wisconsin supper club tradition to your home kitchen. It features fresh white fish fillets coated in a light, crispy beer batter and fried to golden perfection. This recipe works because the cold beer batter creates a shatteringly crisp crust while keeping the fish moist and flaky inside.

Ingredients

  • 1 ½ lbs (680 g) white fish fillets (cod, haddock, or walleye), skinless
  • 1 cup (125 g) all-purpose flour
  • 1 cup (125 g) cornstarch
  • 1 tsp (5 g) baking powder
  • 1 tsp (5 g) salt, plus more for seasoning
  • ½ tsp (1 g) black pepper
  • ½ tsp (1 g) paprika
  • ¼ tsp (0.5 g) garlic powder
  • 1 ½ cups (355 ml) cold beer (lager or pilsner)
  • 1 large egg, beaten
  • Vegetable oil or canola oil, for frying
  • Lemon wedges, for serving
  • Tartar sauce, for serving

Instructions

  1. Pat the fish fillets dry with paper towels. If they are thick, slice them into 4-ounce (115 g) portions. Season both sides lightly with salt and pepper. Set aside.
  2. In a large bowl, whisk together the flour, cornstarch, baking powder, 1 tsp salt, black pepper, paprika, and garlic powder.
  3. Make a well in the center of the dry ingredients. Pour in the cold beer and the beaten egg. Whisk gently until just combined—the batter should be smooth and about the consistency of heavy cream. Do not overmix; a few lumps are fine. If the batter seems too thick, add a splash more beer. Keep the batter cold until ready to use.
  4. Pour oil into a deep, heavy-bottomed pot or Dutch oven to a depth of about 2 inches (5 cm). Heat over medium-high heat until the oil reaches 350°F (175°C) on a deep-fry thermometer.
  5. While the oil heats, set a wire rack over a baking sheet. This will hold the fried fish and keep it crisp.
  6. Working in batches, dip each fish fillet into the batter, allowing excess to drip off. Carefully lower the fish into the hot oil. Do not overcrowd the pot—fry only 2–3 pieces at a time.
  7. Fry for 4–5 minutes, turning once, until golden brown and cooked through. The fish should reach an internal temperature of 145°F (63°C) as measured with a food thermometer, per USDA FSIS safe minimum guidelines.
  8. Using tongs or a slotted spoon, transfer the fried fish to the wire rack. Sprinkle immediately with a pinch of salt. Return the oil to 350°F (175°C) between batches.
  9. Serve hot with lemon wedges and tartar sauce.

Tips

  • Keep the batter cold: The colder the batter, the crispier the crust. Chill the beer and the mixed batter in the refrigerator until you’re ready to dip. The contrast between cold batter and hot oil creates that signature crunch.
  • Don’t overmix: Overmixing develops gluten, which makes the batter tough and heavy. Stir just until the flour is moistened—lumps are okay.
  • Maintain oil temperature: If the oil drops below 325°F (165°C), the fish will absorb oil and become greasy. Use a thermometer and wait for the oil to come back to 350°F (175°C) between batches.
  • Substitutions: No beer? Use cold club soda or sparkling water for a similar texture—the carbonation is what matters. For a gluten-free version, substitute the all-purpose flour with a 1:1 gluten-free flour blend and ensure the beer is gluten-free.

Serving Suggestions

Serve the fish fry with classic Wisconsin sides: coleslaw, french fries or potato pancakes, rye bread with butter, and a side of pickles. Malt vinegar or a squeeze of fresh lemon brightens the flavor. For a full supper club experience, offer a basket of warm dinner rolls and a cold beer or a brandy old fashioned.

Variations

  • Oven-Baked: For a lighter version, place the battered fish on a greased baking sheet and bake at 425°F (220°C) for 12–15 minutes, flipping once, until golden and cooked to 145°F (63°C).
  • Spicy: Add 1–2 teaspoons of cayenne pepper or a few dashes of hot sauce to the batter for a kick.
  • Herb-Infused: Stir in 1 tablespoon of chopped fresh dill or parsley into the batter for a fresh flavor.
  • Different Fish: This recipe works well with any firm white fish—try perch, tilapia, or even shrimp (adjust cooking time to 2–3 minutes).

Storage and Reheating

Leftover fried fish can be refrigerated in an airtight container for up to 3 days. To reheat and maintain crispiness, place the fish on a wire rack over a baking sheet and warm in a 375°F (190°C) oven for 8–10 minutes, or until heated through to 165°F (74°C). Avoid the microwave, as it will make the coating soggy. For longer storage, freeze the fried fish in a single layer on a baking sheet, then transfer to a freezer bag for up to 2 months. Reheat from frozen in the oven at 400°F (200°C) for 12–15 minutes.

Frequently Asked Questions

What is the best fish for a Wisconsin fish fry? Traditionally, walleye or perch are used in Wisconsin, but cod, haddock, or tilapia are excellent and more widely available. Choose a firm, white, flaky fish that holds up well to frying.

Can I use a different type of beer? Yes, a light lager or pilsner is classic, but any beer you enjoy drinking will work. Darker beers like stouts will add a stronger, maltier flavor. Non-alcoholic beer or club soda also work well.

Why is my batter not crispy? The most common reasons are: the oil isn’t hot enough, the batter was overmixed, or the fish was overcrowded in the pan. Make sure the oil is at 350°F (175°C) and fry in small batches.

How do I know when the fish is done? The fish should be golden brown and flake easily with a fork. For safety, use an instant-read thermometer—the internal temperature should reach 145°F (63°C).

Can I prepare the batter ahead of time? Yes, you can mix the dry ingredients ahead and store them in a sealed container. The wet batter is best made fresh, but you can mix it up to 1 hour ahead and keep it refrigerated. Stir gently before using.

What can I use instead of cornstarch? Cornstarch helps create a lighter, crispier crust. If you don’t have it, you can substitute with an equal amount of all-purpose flour, but the texture will be slightly denser. Rice flour is another good gluten-free alternative.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).