Black line glazing is a ceramic finishing technique that creates a distinctive dark, often textured line where two glaze colors meet, popular among potters in Salem, Oregon, and beyond. This recipe-style guide walks you through achieving that striking effect using a commercial black underglaze or slip and a clear or contrasting glaze, with practical steps for both bisque and greenware. It works because the black line acts as a barrier, preventing the glazes from bleeding into each other while adding a graphic, hand-drawn quality to your work.
Ingredients
- 1 bisque-fired or leather-hard ceramic piece (e.g., mug, bowl, or tile)
- Black underglaze or black slip (commercial, e.g., Amaco Velvet or Speedball), 2 oz (60 ml) for a medium-sized piece
- Clear or colored glaze for the base and top, 4 oz (120 ml) total
- Water for thinning, as needed
- Sponge or damp cloth for cleanup
Instructions
- Prepare your piece: Ensure your ceramic piece is clean and free of dust. If it is greenware, it should be leather-hard (not fully dry). If bisque-fired, it should be room temperature and dry.
- Mix the black line: In a small cup, stir the black underglaze or slip thoroughly. If it is too thick to flow smoothly from a brush or applicator, add water a few drops at a time until it has the consistency of heavy cream.
- Apply the base glaze (optional): If you want a colored background, brush or dip the piece in your base glaze, leaving the area where the black line will go unglazed. Let it dry to the touch. If you are using a single clear glaze over everything, skip this step.
- Draw the black line: Using a fine brush, a slip trailer, or a squeeze bottle with a fine tip, apply the black underglaze in a continuous, even line. This line can be straight, wavy, or any design you like. Keep the line width consistent—typically 1/16 to 1/8 inch (1.5–3 mm) for a crisp look.
- Let the line dry: Allow the black line to dry completely to the touch. This usually takes 10–15 minutes at room temperature. Do not rush this; if the line is still wet, it can smear when you apply the top glaze.
- Apply the top glaze: Carefully brush or dip the piece with a clear or contrasting glaze, covering the entire surface including the black line. If brushing, use even, overlapping strokes, and avoid going over the same spot repeatedly to prevent dragging the black line.
- Fire the piece: Once the glaze is completely dry, fire the piece according to the glaze manufacturer’s instructions. Typically, this is a cone 5–6 firing (around 2200°F / 1204°C) for stoneware, but always check your specific glaze labels.
- Cool and inspect: After firing, allow the kiln to cool completely before opening. Inspect your piece to see the black line effect—it should appear as a sharp, dark line where the glazes meet.
Tips
- Substitutions: If you don’t have black underglaze, you can use black slip (liquid clay with colorant) or even a black engobe. For a glossy black line, use a black glaze instead, but be aware it may flow during firing, blurring the line.
- Test first: Always test the black line on a small tile with the exact glazes you plan to use. Some black underglazes can bleed or disappear under certain clear glazes, especially at higher temperatures.
- Line thickness: A very thin line (less than 1/16 inch) may disappear during glazing or firing. A very thick line (over 1/4 inch) can cause the glaze to crawl or pool. Aim for a medium thickness.
- Common mistake: Applying the top glaze too thickly can cause it to run and obscure the black line. Use a medium coat and avoid multiple heavy layers.
Serving Suggestions
Black line glazed ceramics are functional art—use them as mugs, bowls, or plates for everyday meals or special occasions. They make excellent gifts for pottery enthusiasts. Display a set of black line glazed tiles as a decorative backsplash or trivet.
Variations
- Colored lines: Substitute the black underglaze with any dark color (like deep blue or burgundy) for a softer contrast.
- Wax resist technique: Apply the black line, let it dry, then paint wax resist over the line. Glaze the piece, and the wax will resist the glaze, leaving the black line exposed after firing for a raw, matte effect.
- Sgraffito style: Instead of drawing the line directly, apply black underglaze to the entire piece, let it dry, then carve through it to reveal the clay body, creating a negative line.
- Multiple lines: Create a pattern with several parallel black lines, or crosshatch them for a dynamic design.
Storage and Reheating
Store unused black underglaze and glazes in airtight containers at room temperature. They can last for months if kept sealed and stirred before use. Once a piece is fired, it is permanent and does not need reheating. If you have leftover mixed underglaze, you can store it in a small jar for up to a few weeks; just re-stir before using.
Frequently Asked Questions
Can I apply the black line on greenware? Yes, you can apply black slip or underglaze to leather-hard greenware. However, be careful not to distort the piece when handling it. The line will shrink with the clay during drying and firing.
Will the black line stay black after firing? Most commercial black underglazes are formulated to stay black at cone 5–6. At higher temperatures (cone 10), some blacks may shift to a dark brown or develop a metallic sheen. Always test at your firing temperature.
Can I use a black marker instead of underglaze? No, regular markers will burn out in the kiln. Use only ceramic-specific underglaze pens or markers, which are available from ceramic suppliers.
Why did my black line blur? Blurring usually happens when the top glaze is applied too thickly or when the piece is fired too fast, causing the glaze to flow. Try applying a thinner glaze coat and using a slower firing schedule.
How do I clean my brush after using underglaze? Clean brushes with water immediately after use. Dried underglaze can be removed with a brush cleaner or by soaking in warm water.
Can I fire the piece twice? Yes, you can fire a piece multiple times. If the black line didn’t come out as desired, you can apply more underglaze and refire at a lower temperature (e.g., cone 06) to add detail, but be aware that multiple firings can affect the glaze’s finish.
Related
- Date Chia Seed Pudding: Easy 5-Minute Recipe
- Dairy-Free Chia Pudding: Easy 5-Minute Recipe
- Chia Seed Pudding with Coconut Milk: Easy Recipe
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).