Dan’s Fish Fry: Crispy Beer-Battered Recipe

Updated November 21, 2026

Total time
35 min
prep 20 min · cook 15 min
Serves
4
portions as written
Safe temperature (USDA)
145°F / 63°C
check the thickest piece

Jump to recipe

Dan’s Fish Fry is a classic American supper of white fish fillets dipped in a light beer batter and fried until golden and shatteringly crisp. The carbonation in the beer keeps the coating airy, while a blend of cornstarch and flour ensures it stays crunchy even after a few minutes on the plate. It’s a straightforward, reliable recipe that works for a weeknight dinner or a casual gathering.

Ingredients

  • 1 ½ lb (680 g) firm white fish fillets (cod, haddock, or pollock), skin removed
  • 1 cup (125 g) all-purpose flour
  • ½ cup (60 g) cornstarch
  • 1 tsp baking powder
  • 1 tsp salt, plus more for seasoning
  • ½ tsp paprika
  • ¼ tsp black pepper
  • 1 cup (240 ml) cold lager beer (or sparkling water)
  • 1 large egg, beaten
  • Vegetable oil or peanut oil, for frying (about 4 cups / 960 ml)
  • Lemon wedges, for serving

Instructions

  1. Pat the fish fillets dry with paper towels. Cut them into serving-sized pieces, about 4–6 oz (115–170 g) each. Season lightly with salt and set aside.
  2. In a large bowl, whisk together the flour, cornstarch, baking powder, 1 tsp salt, paprika, and black pepper. Make a well in the center.
  3. Pour the cold beer and beaten egg into the well. Whisk gently until just combined; the batter should be smooth but may have a few small lumps. Do not overmix. If the batter seems too thick, add an extra tablespoon of beer. If too thin, add a teaspoon of flour. It should coat the back of a spoon.
  4. In a deep, heavy pot (like a Dutch oven) or a deep fryer, heat about 2 inches (5 cm) of oil to 350°F (175°C). Use a deep-fry thermometer to monitor the temperature.
  5. While the oil heats, set a wire rack over a baking sheet. This will hold the cooked fish and keep it crisp.
  6. When the oil is ready, dip a few pieces of fish into the batter, letting the excess drip off. Carefully lower them into the hot oil. Do not crowd the pot; cook in batches of 3–4 pieces.
  7. Fry for 4–5 minutes, turning once, until the coating is deep golden brown and the fish is cooked through. The internal temperature should reach 145°F (63°C) as the safe minimum, per USDA FSIS guidelines. Check with an instant-read thermometer.
  8. Remove the fish with a slotted spoon and drain on the wire rack. Sprinkle with a little salt while hot. Return the oil to 350°F (175°C) between batches.
  9. Serve immediately with lemon wedges and your favorite sides.

Tips

  • Keep the beer cold: Cold batter hits hot oil and creates a lighter, crispier crust. If the batter sits out, it will warm up; place it in the fridge between batches if your kitchen is warm.
  • Don’t overmix: A few lumps are fine. Overmixing develops gluten, which makes the coating tough and heavy.
  • Use a thermometer: The oil temperature will drop when you add fish. Adjust the heat to maintain 350°F (175°C). If the oil is too cool, the fish absorbs oil and turns greasy; if too hot, the outside burns before the fish cooks.
  • Substitute for beer: If you prefer not to use alcohol, replace the beer with an equal amount of cold sparkling water or club soda. The batter will still be light, but you’ll lose a bit of the malty flavor.

Serving Suggestions

Serve the fish fry with classic sides like coleslaw, hush puppies, french fries, or a simple green salad. Tartar sauce, malt vinegar, or a squeeze of fresh lemon all work beautifully. For a New England–style touch, serve on a soft bun with lettuce and tomato for a fish sandwich.

Variations

  • Spicy: Add ½ tsp cayenne pepper or a few dashes of hot sauce to the batter.
  • Herbed: Stir in 1 tbsp chopped fresh dill or parsley into the batter.
  • Cornmeal crust: Replace the cornstarch with ½ cup (70 g) fine cornmeal for a crunchier, more rustic texture.
  • Gluten-free: Use a 1:1 gluten-free flour blend in place of the all-purpose flour, and ensure your beer is gluten-free (or use sparkling water).

Storage and Reheating

Leftover fried fish is best eaten within 1–2 days. Store it in an airtight container in the refrigerator. To reheat, place the fish on a wire rack over a baking sheet and warm it in a 375°F (190°C) oven for 8–10 minutes, until heated through and crisp. Avoid microwaving, as it will make the coating soggy. The fish is safe to eat for up to 3–4 days refrigerated, but quality drops significantly after day 2.

Frequently Asked Questions

Can I use frozen fish? Yes, but thaw it completely in the refrigerator and pat it very dry before battering. Excess moisture will cause the batter to slide off.

What type of beer is best? A light lager or pilsner works best—it adds carbonation without overwhelming the fish. Avoid dark or heavy beers, which can turn bitter during frying.

Can I bake or air-fry this instead? You can, but the texture won’t be as crisp. For baking, place battered fish on a greased baking sheet and bake at 425°F (220°C) for 15–18 minutes, flipping once. For air-frying, spray the fish with oil and cook at 400°F (200°C) for 10–12 minutes, flipping halfway.

Why did my batter fall off? The fish was likely too wet, or the oil wasn’t hot enough. Pat the fillets dry thoroughly and make sure the oil is at 350°F (175°C) before adding the fish.

Can I make the batter ahead of time? It’s best to make it fresh, as the baking powder will lose its lift. If you must, prepare it up to 1 hour ahead and keep it chilled.

How do I know when the fish is done? The coating should be golden brown and the fish should flake easily with a fork. The internal temperature should read 145°F (63°C) on an instant-read thermometer.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).