Beaver Dam Fish Fry Recipe (Crispy & Golden)

Updated November 21, 2026

Total time
35 min
prep 20 min · cook 15 min
Serves
4
portions as written
Safe temperature (USDA)
145°F / 63°C
check the thickest piece

Jump to recipe

Beaver Dam fish fry is a beloved Midwestern American tradition, particularly popular in Wisconsin, where Friday night fish fries are a weekly ritual. This version delivers an exceptionally crispy, golden-brown crust thanks to a beer-based batter, while the flaky white fish stays moist and tender inside. It’s a straightforward, satisfying meal that brings the classic supper club experience right to your home kitchen.

Ingredients

  • 1 ½ lbs (680 g) firm white fish fillets (such as cod, haddock, or walleye), skinless
  • 1 cup (125 g) all-purpose flour
  • 1 cup (240 ml) beer (lager or pilsner works best)
  • 1 teaspoon baking powder
  • 1 teaspoon salt
  • ½ teaspoon black pepper
  • ½ teaspoon garlic powder (optional)
  • 1 large egg
  • Vegetable oil, for frying (about 2 cups / 480 ml)
  • Lemon wedges, for serving
  • Tartar sauce, for serving

Instructions

  1. Pat the fish fillets dry with paper towels. If they are very thick, cut them into 4-ounce (115 g) portions. Season lightly with salt and pepper.
  2. In a large bowl, whisk together the flour, baking powder, salt, pepper, and garlic powder (if using).
  3. Add the beer and egg to the dry ingredients. Whisk until smooth, with no lumps. The batter should be the consistency of thin pancake batter; if it’s too thick, add a splash more beer. Let it rest for 5 minutes while the oil heats.
  4. Pour the oil into a deep, heavy-bottomed skillet or Dutch oven to a depth of about 1 inch (2.5 cm). Heat over medium-high until it reaches 350°F (175°C). If you don’t have a thermometer, test by dropping a small spoonful of batter into the oil; it should sizzle and float to the surface immediately.
  5. Dip each fish fillet into the batter, letting the excess drip off. Carefully place it into the hot oil. Fry in batches, without overcrowding the pan, for 3-4 minutes per side, until golden brown and the fish flakes easily with a fork.
  6. Check the internal temperature of the thickest part of the fish with a food thermometer; it must reach 145°F (63°C), which is the USDA FSIS safe minimum for fish.
  7. Remove the fried fish with a slotted spoon and drain on a wire rack set over a baking sheet (not on paper towels, which can make the crust soggy). Keep warm in a low oven (200°F / 95°C) while frying the remaining batches.
  8. Serve immediately with lemon wedges and tartar sauce.

Tips

  • Keep the oil temperature steady: Use a deep-fry thermometer and adjust the heat between batches. If the oil is too cool, the batter absorbs oil and becomes greasy; if too hot, the outside burns before the fish cooks.
  • Don’t overmix the batter: A few small lumps are fine. Overmixing develops gluten, which makes the crust tough instead of light and crispy.
  • Substitute for beer: If you prefer not to use alcohol, replace the beer with an equal amount of cold sparkling water or club soda. The carbonation still creates a light, airy batter, though the flavor will be slightly less complex.
  • Pat the fish dry: Moisture is the enemy of crispiness. Make sure the fillets are thoroughly dried before dipping them in the batter.

Serving Suggestions

Serve the fish fry with classic Wisconsin-style sides: coleslaw, French fries or potato wedges, rye bread with butter, and a wedge of lemon. Pickles and raw onion slices are also common accompaniments. For a full supper club experience, offer malt vinegar alongside the tartar sauce.

Variations

  • Spicy version: Add 1 teaspoon of paprika and ¼ teaspoon of cayenne pepper to the dry batter ingredients for a subtle kick.
  • Herb crust: Stir 1 tablespoon of chopped fresh dill or parsley into the batter for a fresh, herbal note.
  • Gluten-free: Replace the all-purpose flour with a 1:1 gluten-free flour blend. The batter may need a little extra liquid; add beer or sparkling water a tablespoon at a time until it reaches the right consistency.
  • Oven-baked: For a lighter option, place the battered fish on a greased baking sheet and bake at 425°F (220°C) for 12-15 minutes, flipping once, until golden and cooked through. The crust won’t be as crispy as fried, but it’s still delicious.

Storage and Reheating

Leftover fried fish can be stored in an airtight container in the refrigerator for up to 3 days. To reheat, place the fish on a wire rack over a baking sheet and warm it in a 375°F (190°C) oven for 8-10 minutes, until heated through and the crust crisps up again. Avoid microwaving, as it will make the batter soggy. For longer storage, freeze the fried fish in a single layer on a baking sheet, then transfer to a freezer bag for up to 2 months. Reheat from frozen in a 400°F (200°C) oven for 15-18 minutes.

Frequently Asked Questions

What is the best fish for a fish fry? Firm, white, and mild fish are ideal. Cod, haddock, walleye, and pollock are all excellent choices. They hold up well to frying and have a clean flavor that lets the batter shine. Avoid delicate fish like sole or tilapia, which may fall apart.

Can I use non-alcoholic beer? Yes, non-alcoholic beer works just as well in the batter. The alcohol cooks off during frying anyway, so it’s mainly for flavor and carbonation. You can also use sparkling water for a neutral taste.

Why is my batter not sticking to the fish? This usually happens if the fish is too wet. Pat the fillets very dry with paper towels before dipping. Also, make sure the batter isn’t too thin; it should coat the back of a spoon. If it’s too thin, add a little more flour.

How do I know when the oil is hot enough? The best way is to use a deep-fry thermometer. The oil should be at 350°F (175°C). If you don’t have one, drop a small cube of bread into the oil; it should brown in about 60 seconds. If it browns faster, the oil is too hot; if slower, it’s not hot enough.

Can I prepare the batter ahead of time? You can mix the dry ingredients in advance, but the wet batter is best made just before frying. If you make it too early, the baking powder will lose its leavening power, and the batter may become flat.

Is it safe to reuse the frying oil? Yes, you can reuse oil if it wasn’t overheated. Let it cool completely, strain through a fine-mesh sieve to remove any bits, and store in a sealed container in a cool, dark place. It can be reused once or twice, but discard it if it smells rancid or becomes dark and foamy.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).