Hoover Vacuum Accessories: A Complete Guide

This guide covers the essential Hoover vacuum accessories, from crevice tools to HEPA filters, explaining what each one does and how to use it to keep your home genuinely clean. Whether you have an upright, canister, or cordless stick model, the right attachments make the difference between a quick pass and a deep clean. Below you will find a practical breakdown of the most common Hoover accessories, how to attach and maintain them, and answers to the questions owners actually ask.

Ingredients

1 Hoover vacuum (any model with a standard 1.25-inch or 1.5-inch hose port; check your manual)
1 crevice tool (usually included, about 12 inches / 30 cm long)
1 dusting brush (bristle brush, about 8 inches / 20 cm wide)
1 upholstery tool (flat nozzle with a fabric strip, about 6 inches / 15 cm wide)
1 combination tool (crevice + brush in one, optional)
1 HEPA filter (replace every 6–12 months, depending on use)
1 pre-motor foam filter (wash every 1–2 months)
1 turbo brush or motorized pet tool (for pet hair, optional)
1 extension wand (if not built-in)
1 hose (if not built-in)

Instructions

Identify your hose port size. Most Hoover uprights and canisters use a 1.25-inch (3.2 cm) or 1.5-inch (3.8 cm) diameter hose. Check the end of your hose or the manual. If you have a cordless stick, the port is often smaller, about 1 inch (2.5 cm). This determines which accessories fit directly.
Attach the crevice tool for tight spaces. Push the crevice tool onto the hose end or wand until it clicks. Use it along baseboards, corners, between couch cushions, and around car seats. For deep crevices, attach the extension wand first, then the crevice tool.
Switch to the dusting brush for delicate surfaces. The dusting brush has soft bristles. Slide it onto the hose or wand. Use it on lampshades, blinds, shelves, keyboard, and baseboards. Do not use it on wet surfaces—the brush will pick up moisture and can damage the vacuum.
Use the upholstery tool for fabric. The upholstery tool is wider and has a fabric strip to prevent scratching. Attach it and run it over sofas, chairs, mattresses, and car interiors. For pet hair, use the turbo brush if you have one—it has a spinning brush roll that agitates fur.
Combine tools for multi-surface cleaning. If you have a combination tool, it has a crevice end and a brush end. Slide the brush back to expose the crevice, or push it forward to cover it. This is handy for quick transitions between floor and furniture.
Attach the extension wand for high or low areas. Click the wand into the hose, then add the desired tool. Use it for ceiling corners, cobwebs, under furniture, or reaching the top of curtains.
Clean the filters regularly. The pre-motor foam filter traps dust before it reaches the motor. Remove it every 1–2 months, tap off loose dust, and rinse under cold water until the water runs clear. Squeeze out excess water (do not twist), and let it air-dry completely for 24 hours before reinstalling. The HEPA filter should be replaced every 6–12 months, or when it appears clogged. Never wash a HEPA filter unless the manual says it is washable—most are not.
Check the brush roll for hair and debris. Turn off and unplug the vacuum. Use scissors or a seam ripper to cut away hair, string, and threads wrapped around the brush roll. Do this every 2–4 weeks if you have pets or long hair.

Tips

Substitutions: If you lost a specific Hoover tool, most universal accessories fit the standard 1.25-inch or 1.5-inch hose. Third-party kits are inexpensive and work well, but check the diameter before buying.
Storage: Keep accessories in a small bin or hang them on a hook near your vacuum. Avoid storing them in direct sunlight, which can crack plastic over time.
Common mistake: Forgetting to empty the dust cup or replace the bag when it is 2/3 full. A full bag or cup reduces suction, making accessories less effective. Also, never use the dusting brush on wet spills—it will smear and can damage the vacuum motor.
Maintenance: Wash the foam filter every 1–2 months, but always let it dry fully. A damp filter can cause mold and reduce suction.

Serving Suggestions

Use your Hoover accessories for a weekly 15-minute touch-up: crevice tool along baseboards, dusting brush on shelves, upholstery tool on the couch, and turbo brush on the stairs. For a deeper monthly clean, use the extension wand to reach ceiling corners and under heavy furniture. The combination tool is perfect for quick car cleanouts.

Variations

Pet hair kit: Add a motorized turbo brush and a rubber squeegee tool. The turbo brush agitates fur, while the squeegee pulls hair from carpets and upholstery.
Hardwood floor tool: Use a soft-bristle floor brush or a dedicated hardwood attachment with felt pads to avoid scratching. Attach it to the wand and vacuum directly on hard floors.
Mini power nozzle: For stairs and car interiors, a small powered brush head (like the Hoover Pet Plus) gives extra agitation for embedded dirt.
Extension hose: If your vacuum lacks a long hose, buy a 10-foot (3 m) extension hose that connects to the main hose. This is useful for stairs and ceilings.

Storage and Reheating

Store all accessories in a dry place at room temperature. After each use, empty the dust cup or replace the bag if it is more than 2/3 full. Wash the foam filter every 1–2 months and let it air-dry for 24 hours. Replace the HEPA filter every 6–12 months. If you store the vacuum for more than a month, remove the battery (if cordless) and store it separately at room temperature. Do not leave the vacuum in a hot garage or cold basement, as extreme temperatures can damage plastic parts and batteries.

Frequently Asked Questions

Can I use any brand of accessories on my Hoover? Yes, as long as the diameter matches. Most Hoover models use 1.25-inch or 1.5-inch ports. Universal kits are available, but check the measurements. If you have a cordless stick, the port is often smaller, so look for “Hoover cordless compatible” accessories.

Why is my Hoover losing suction? The most common causes are a full dust cup or bag, a clogged filter, or a blockage in the hose. Empty the cup, clean the foam filter, and check the hose for clogs by inserting a broom handle to push out debris.

How often should I clean the filters? The foam filter should be rinsed every 1–2 months, depending on use. The HEPA filter should be replaced every 6–12 months, or when it looks dirty and you notice reduced airflow. Always let foam filters dry completely before reinstalling.

Can I wash a HEPA filter? Only if the manual says it is washable. Most Hoover HEPA filters are not washable and should be replaced. Washing a non-washable HEPA filter can damage it and reduce filtration efficiency.

Why does my turbo brush stop spinning? Hair and string often wrap around the brush roll, jamming it. Turn off the vacuum, unplug it, and cut away the debris with scissors. Also check that the belt is not broken—if it is, replace it (usually a simple DIY part).

How do I clean the hose? Detach the hose and use a long, flexible brush or a broom handle to push out clogs. For sticky debris, rinse the hose with warm water and let it dry completely before reattaching. Never put a wet hose back on the vacuum.

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).