Paper Butterfly Craft: Easy Step-by-Step Guide

Updated November 16, 2026

Jump to recipe

Making paper butterflies is a simple, satisfying craft that turns flat paper into a delicate, three-dimensional decoration. You can use any paper you have on hand—scrapbook paper, magazine pages, wrapping paper, or even pages from an old book—and the finished butterflies can be hung from the ceiling, attached to a card, or used to dress up a gift. This guide walks you through two classic methods: the accordion-fold butterfly and the simpler flat cut-out version, so you can choose the one that best suits your project.

What You’ll Need

  • Paper (two squares for the accordion method, or one rectangle for the cut-out method; 6×6 inches or 8.5×11 inches works well)
  • Scissors
  • Ruler (optional, for measuring)
  • Pencil (optional, for tracing)
  • Pipe cleaner, twist tie, or a small piece of tape (to hold the wings together)
  • Hole punch (optional, for hanging)
  • String or thread (if you want to hang them)
  • Glue stick or double-sided tape (if you want to layer wings or attach to a card)

Step-by-Step

Method 1: Accordion-Fold Butterfly

  1. Prepare your paper. Cut two squares of paper of the same size. For a classic butterfly, use one square for the upper wings and one for the lower wings. You can use two different colors or patterns for a contrasting look.
  2. Fold the first square. Place the square on a flat surface with the pattern side facing down. Fold it in half diagonally to make a triangle, then unfold. This gives you a crease to work from. Now, fold the square back and forth in an accordion style, starting from one edge. Make each fold about 1/4 to 1/2 inch wide. Keep the folds as even as possible—you can use a ruler to measure if you like. When you reach the other edge, you’ll have a long, narrow strip of folded paper.
  3. Fold the second square the same way. Repeat step 2 with the second square, making the folds the same width as the first. This will ensure your wings match in size.
  4. Shape the wings. For the upper wings, take one folded strip and pinch it in the middle. For the lower wings, take the other strip and pinch it in the middle. You can leave the strips as rectangles, or trim the ends to create a rounded or pointed wing shape. To make a classic butterfly wing, cut the corners off the ends of the strip at a slight angle. Experiment with different shapes—the folded paper will fan out into the wing.
  5. Attach the wings. Place the two folded strips on top of each other, with the pinched middles aligned. The strip that will be the upper wings should be on top. Wrap a pipe cleaner around the middle to secure them together. If you’re using a twist tie or tape, wrap it tightly around the center. Twist the pipe cleaner ends to make antennae—curl the tips with your fingers or a pencil.
  6. Fan out the wings. Gently pull the folds apart on each side to create the butterfly’s wings. Fluff them out so they look full and symmetrical. You can adjust the angle of the wings by bending the pipe cleaner.

Method 2: Simple Cut-Out Butterfly

  1. Fold your paper. Take a rectangle of paper (or a square, if you prefer). Fold it in half lengthwise, so the short edges meet. This creates a fold line that will be the butterfly’s body.
  2. Draw half a butterfly. On the folded paper, draw half of a butterfly shape along the fold. Start at the fold line near the top, draw the upper wing, then the lower wing, and end at the fold line near the bottom. Make the shape as simple or as ornate as you like. If you’re not confident drawing freehand, you can find a template online or trace a shape from a cookie cutter.
  3. Cut out the butterfly. With the paper still folded, cut along the line you drew. Be careful not to cut through the fold—that’s what keeps the two halves connected. When you unfold the paper, you’ll have a complete butterfly shape.
  4. Add details (optional). You can leave the butterfly flat, or you can fold it in half along the body line to give it a slight 3D effect. You can also cut small notches or patterns along the wings’ edges for decoration.
  5. Finish. If you want to hang it, punch a small hole in the top of the upper wings and thread a string through. Or glue the butterfly to a card, a gift box, or a stick to make a garden ornament.

Common Mistakes

  • Uneven accordion folds. If your folds vary in width, the wings will look lopsided. Use a ruler to measure each fold, or at least be consistent as you go.
  • Cutting through the fold on the cut-out method. This is the most common error—if you cut the fold, you’ll end up with two separate wings instead of a connected butterfly. Cut slowly and stop before you reach the fold.
  • Using paper that’s too thick. Cardstock or heavy scrapbook paper can be hard to fold neatly, and the accordion method may result in bulky, stiff wings. For accordion butterflies, use lightweight paper like printer paper, wrapping paper, or origami paper.
  • Making the folds too wide. Wide folds create chunky, less delicate wings. For a more elegant look, keep your folds narrow (1/4 inch or less).

Tips

  • For a more realistic butterfly, use two different sizes of squares for the wings—a larger square for the upper wings and a smaller one for the lower wings.
  • Add a drop of glue to the center of the wings before wrapping with the pipe cleaner to keep everything in place.
  • To make a mobile, hang several butterflies at different lengths from a hoop or a branch.
  • Use a hole punch to create decorative dots on the wings before folding.
  • If you’re making butterflies with kids, pre-cut the paper squares and help with the accordion folding—it can be tricky for little hands.
  • For a quick gift topper, make a tiny butterfly from a 3-inch square and attach it to a ribbon on a present.

Troubleshooting

  • The wings won’t fan out. If your accordion folds are too tight or the paper is too thick, the wings may not spread easily. Gently press down on the folds to loosen them, or try using thinner paper.
  • The butterfly falls apart. If the pipe cleaner or twist tie isn’t tight enough, the wings will slip. Re-wrap the center more firmly, or add a dab of hot glue to secure the paper before wrapping.
  • The cut-out butterfly looks messy. If your freehand drawing is uneven, the cut-out will be too. Try folding the paper and cutting a symmetrical shape from a template, or use a pencil to draw a more precise outline before cutting.
  • The wings are different sizes. With the accordion method, this happens when the two squares are different sizes or the folds are different widths. Measure both squares and make the folds the same width. With the cut-out method, ensure you’re cutting along the drawn line accurately.

Frequently Asked Questions

What is the best paper for making paper butterflies? Lightweight paper is best for the accordion method—printer paper, origami paper, or wrapping paper work well. For the cut-out method, you can use heavier paper like cardstock, as it will hold its shape better.

Can I make a paper butterfly without a pipe cleaner? Yes. You can use a twist tie, a small piece of tape, or even a staple to hold the wings together. To make antennae without a pipe cleaner, you can glue on two thin strips of paper or thin wire.

How do I make my butterfly look more realistic? Use paper with a pattern that resembles butterfly wings, like floral or leaf prints. You can also add details like a black body made from a strip of paper, or draw veins on the wings with a marker.

Can I make a paper butterfly from a regular sheet of printer paper? Absolutely. Cut the sheet into a square for the accordion method, or use the whole sheet for the cut-out method. Printer paper is a great choice for practice.

How do I hang a paper butterfly? Punch a small hole in the top of the upper wings and thread a piece of string, thread, or fishing line through it. You can also attach a small loop of tape to the back and stick it to a wall or window.

How long does it take to make one butterfly? Once you’ve made a few, an accordion butterfly takes about 5 minutes. A simple cut-out butterfly can be done in under 3 minutes, plus time for drawing and cutting.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).