Muffin Store IPA Recipe: Brew It at Home

Updated November 20, 2026

Total time
4 hr 15 min
prep 45 min · cook 1 hr 30 min
Serves
5
portions as written

Jump to recipe

Muffin Store IPA is a bold, hop-forward American IPA inspired by the classic West Coast style, with a firm malt backbone and a dry, bitter finish. This recipe uses a simple single-infusion mash and a generous late-hop addition to build big citrus and pine aromas without requiring advanced brewing equipment. It is designed for extract and partial-mash brewers who want a reliable, flavorful IPA that showcases the hops.

Ingredients

  • 8 lb (3.6 kg) light dried malt extract (DME) or 10 lb (4.5 kg) liquid malt extract (LME)
  • 1 lb (450 g) crystal malt 40L (steeped)
  • 1 oz (28 g) Magnum hops (12% AA) – bittering addition (60 min)
  • 1 oz (28 g) Centennial hops – flavor addition (15 min)
  • 2 oz (57 g) Cascade hops – aroma addition (5 min)
  • 2 oz (57 g) Citra hops – dry hop (after fermentation)
  • 1 tsp (5 g) Irish moss or other kettle finings (15 min)
  • 1 packet (11 g) American ale yeast (e.g., Safale US-05) or liquid yeast (e.g., Wyeast 1056)
  • 5 gallons (19 L) filtered or spring water (plus extra for topping up)
  • 3/4 cup (150 g) priming sugar (for bottling) or 2.5 oz (70 g) corn sugar (for kegging)

Instructions

  1. Sanitize all equipment that will touch the beer after the boil: fermenter, airlock, siphon, tubing, and bottles. Use a no-rinse sanitizer per the manufacturer’s directions.
  2. Heat 2.5 gallons (9.5 L) of water in a large pot to 155°F (68°C). Turn off heat and steep the crystal malt in a mesh bag for 30 minutes, keeping the temperature between 150–160°F (65–71°C). Remove the grain bag and let it drain; do not squeeze it.
  3. Bring the steeped water to a boil. Remove the pot from heat and stir in the dried malt extract (or liquid malt extract) until fully dissolved. Return to a rolling boil.
  4. Start the 60-minute boil timer. Add the Magnum hops at the 60-minute mark. Boil for 45 minutes.
  5. At 15 minutes left, add the Centennial hops and the Irish moss (if using). Continue boiling.
  6. At 5 minutes left, add the Cascade hops. After the boil is complete, turn off the heat.
  7. Cool the wort quickly to below 80°F (27°C) using an immersion chiller or an ice bath. This should take about 20–30 minutes.
  8. Transfer the cooled wort to a sanitized fermenter, leaving behind the trub (hop residue). Top up with cold, filtered water to reach 5 gallons (19 L). Take a hydrometer reading – it should be around 1.050–1.060.
  9. Aerate the wort by shaking the fermenter vigorously for 2 minutes, then pitch the yeast. Attach the airlock and ferment at 65–70°F (18–21°C) for 7 days.
  10. After 7 days, add the dry hops directly to the fermenter. Let it sit for another 7 days.
  11. After the full 14 days, take a final hydrometer reading – it should be around 1.010–1.015. If it is stable, proceed to packaging.
  12. For bottling: dissolve the priming sugar in 2 cups (475 ml) of boiling water, cool, and add to a bottling bucket. Siphon the beer into the bucket, then bottle and cap. Store at room temperature for 2 weeks to carbonate.
  13. For kegging: rack the beer into a keg, seal, and force-carbonate at 30 psi for 24–48 hours, then reduce to serving pressure (10–12 psi).

Tips

  • Temperature control: Fermenting too warm (above 75°F/24°C) can produce fruity off-flavors. Use a swamp cooler or a temperature-controlled chamber if possible.
  • Hop freshness: Hops lose their aroma quickly. Buy whole-leaf or pellet hops in sealed, oxygen-barrier packaging and use them within 6 months.
  • Extract substitution: If using liquid malt extract, it is stickier – warm the container in hot water before pouring to get it all out. You can also replace 1 lb (450 g) of DME with 1.25 lb (570 g) of LME.
  • Sanitation is key: Any surface that touches the cooled wort must be sanitized. A single lapse can ruin the batch with infection.

Serving Suggestions

Serve the IPA chilled at 45–50°F (7–10°C) in a pint glass or a tulip glass to capture the hop aroma. It pairs well with spicy foods like buffalo wings, grilled burgers, sharp cheddar cheese, and citrusy salads. The bitterness cuts through rich, fatty dishes.

Variations

  • New England IPA: Replace the Magnum bittering hop with a smaller addition of a neutral hop (like Warrior) and add 4 oz (113 g) of Citra and Mosaic at dry hop. Use a yeast like London Ale III and add 1 lb (450 g) of flaked oats to the steep for a hazy, juicy finish.
  • Double IPA: Increase the malt extract to 10 lb (4.5 kg) DME and add an extra 1 oz (28 g) of Magnum at 60 minutes. Dry hop with 4 oz (113 g) of your favorite hops for a bigger, more intense version.
  • Smoked IPA: Replace 0.5 lb (225 g) of crystal malt with smoked malt (e.g., peat-smoked) for a subtle smokiness that pairs with the hops.

Storage and Reheating

Store bottled or kegged beer in a cool, dark place (50–60°F / 10–15°C) for up to 6 months. Once opened, drink within a few days – hop aroma fades quickly. Do not refrigerate until you are ready to drink, as cold storage can cause chill haze (harmless but visually cloudy). For best flavor, consume within 3 months of bottling.

Frequently Asked Questions

Can I use all-grain instead of extract? Yes, substitute the 8 lb DME with 12 lb (5.4 kg) of pale malt and mash at 152°F (67°C) for 60 minutes. Sparge with 170°F (77°C) water to collect 6.5 gallons (24.6 L) of wort, then boil down to 5 gallons (19 L).

Why is my beer cloudy? Chill haze is caused by proteins and polyphenols. Use Irish moss in the boil and cold-crash the beer to 35°F (2°C) for 48 hours before packaging to help clear it. It does not affect flavor.

How long does it take to make? The active brewing day takes about 2.5 hours, plus 14 days of fermentation and dry hopping, and 2 weeks of bottle conditioning – about 4 weeks total from brew day to drinking.

Can I reduce the bitterness? Yes, use a smaller bittering addition (e.g., 0.5 oz / 14 g of Magnum) or add the bittering hops later in the boil (e.g., 30 minutes instead of 60). This will lower the IBUs.

What if my hydrometer reading is higher than expected? That means your wort is more concentrated. Add sterile water to the fermenter to bring it down to your target volume. If it is lower, you may have topped up too much – it will just result in a slightly sessionable IPA.

Is it safe to drink? Yes, as long as you follow proper sanitation and fermentation practices. The alcohol content (typically 5–6% ABV) and low pH make it safe from harmful bacteria. This drink is for adults of legal drinking age – please drink responsibly.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).