Paper Mache Pinata Fish: Step-by-Step Guide

Updated November 13, 2026

Jump to recipe

Paper mache pinata fish are a colorful, playful project for birthdays, summer parties, or ocean-themed events. The fish shape is one of the easiest pinatas to build because its rounded body and tail work naturally with a balloon base and cardboard fins. You will need a few hours of drying time between layers, so plan ahead. This guide walks you through making a sturdy, smashable fish pinata from scratch using flour paste, newspaper, and tissue paper.

What You’ll Need

  • 1 large round balloon (or 2 smaller ones taped together for a longer body)
  • Newspaper, torn into strips about 1–2 inches wide and 6–8 inches long
  • All-purpose flour (1 cup / 120 g) and water (1 cup / 240 ml) for paste, plus extra water to thin
  • Large mixing bowl
  • Cardboard (cereal box weight works well) for fins and tail
  • Masking tape or duct tape
  • Scissors
  • String or yarn for hanging
  • Tissue paper in your chosen colors (orange, yellow, red, or blue)
  • White glue or glue stick (for tissue paper fringe)
  • Optional: googly eyes, markers, or paint for details
  • Plastic tablecloth or newspaper to protect your work surface

Step-by-Step

  1. Blow up the balloon to the size you want the fish body to be. For a standard party pinata, inflate it to about 12–14 inches (30–35 cm) long. Tie it off securely. If you want a longer fish, tape two balloons end to end with masking tape.
  2. Make the paper mache paste. In a large bowl, whisk together 1 cup (120 g) flour and 1 cup (240 ml) water until smooth. Add more water a tablespoon at a time if the paste is too thick—it should be the consistency of thin pancake batter. Stir in 1–2 tablespoons of salt to help prevent mold while drying.
  3. Prepare your workspace. Lay down newspaper or a plastic tablecloth. Have your torn newspaper strips ready before you start dipping.
  4. Apply the first layer. Dip a strip of newspaper into the paste, letting the excess drip off. Smooth it onto the balloon, overlapping slightly. Cover the entire balloon except for a small opening at the top (about 3–4 inches / 8–10 cm) where you will add candy later. Leave this hole uncovered.
  5. Add 3–4 total layers. Let each layer dry completely before adding the next. Drying takes 4–6 hours per layer in a warm, dry room, or overnight. The more layers you add, the sturdier the pinata. For a party that will be hit hard, use 4 layers. For a gentler pull-string pinata, 3 layers is enough.
  6. Cut out the fins and tail from cardboard. Draw a tail shape (like a fan or triangle) and two side fins (like small triangles or rounded shapes). Cut them out with scissors. Make a 1-inch (2.5 cm) tab at the base of each fin so you can attach it to the body.
  7. Attach the cardboard pieces. Once the balloon is fully dry and hard, tape the fins onto the sides and the tail onto the back end using masking tape or duct tape. For extra strength, cover the taped joints with a few strips of paper mache paste and let dry for another hour.
  8. Pop and remove the balloon. Use a pin or scissors to pop the balloon through the top hole. Pull the deflated balloon out through the hole. You now have a hollow fish body.
  9. Add the hanging string. Cut a piece of string about 2 feet (60 cm) long. Tie a knot at one end. Thread the other end through the top hole and out through the same hole, so the knot catches inside. Alternatively, poke two small holes near the top edge and thread the string through, tying a knot on the outside. Make sure the string is strong enough to hold the weight of the filled pinata.
  10. Fill the pinata. Pour candy, small toys, or confetti through the top hole. Do not overfill—leave about 2 inches (5 cm) of empty space so the pinata is easier to break. Fill it only when you are ready to use it, so the candy stays fresh.
  11. Seal the hole. Cover the top opening with a piece of newspaper dipped in paste. Press it down firmly and let it dry for at least 1–2 hours. This seals the candy inside.
  12. Decorate with tissue paper. Cut tissue paper into strips about 2 inches (5 cm) wide and 6 inches (15 cm) long. Fold each strip in half lengthwise and cut small slits along the folded edge to create fringe. Unfold and glue the uncut edge onto the pinata using white glue or a glue stick. Start at the tail and work toward the head, overlapping rows like fish scales. Cover the entire body, including the fins and tail.
  13. Add the face. Glue on googly eyes or draw them with markers. Add a mouth with a curved line or a small piece of red tissue paper. Let the glue dry completely before hanging.

Common Mistakes

  • Using too much paste. Strips soaked in excess paste take forever to dry and can warp the shape. Wipe off the extra paste with your fingers before applying.
  • Skipping layers. Two layers might look fine but will tear easily when hit. Stick to at least 3 layers for a functional pinata.
  • Covering the hole completely. If you forget to leave the top opening, you will have to cut one later, which weakens the structure.
  • Attaching fins before the body is dry. The tape will not stick to damp paper mache. Wait until the body is completely hard.
  • Using too much candy. An overstuffed pinata is very hard to break and may come apart at the string instead. Keep it about three-quarters full.

Tips

  • Work in a warm, well-ventilated room to speed up drying. A fan or dehumidifier helps.
  • Use white paper for the last layer if you plan to paint the fish instead of covering it with tissue paper. Newspaper print can show through paint.
  • For a more realistic fish, add a cardboard dorsal fin on top and a pair of pectoral fins on the sides.
  • If you want a pull-string pinata, attach 6–8 ribbons to the inside of the bottom before sealing the hole. Only one ribbon actually opens the trapdoor; the others are dummies.
  • Make the paste fresh each day. It spoils quickly at room temperature.
  • Use a serrated knife to cut the pinata open after the party if it does not break completely.

Troubleshooting

  • The paper mache is still soft after 24 hours. The paste was too thick or the room is humid. Add more layers only after the current ones are fully dry. Move the pinata to a warmer, drier spot and wait another day.
  • The balloon popped too early. If it pops while you are still applying layers, you can stuff the balloon with crumpled newspaper to keep the shape, or start over with a fresh balloon.
  • The fins keep falling off. Tape them on securely, then wrap a few paste-soaked strips around the joint. Let dry completely before decorating.
  • The pinata breaks too easily when hit. Add 1–2 more layers of paper mache over the entire surface, let dry, then redecorate.
  • The pinata will not break at all. You may have added too many layers. Score the bottom lightly with a utility knife before the party, or use a stronger bat.
  • The tissue paper is peeling off. Use white glue instead of glue stick for better adhesion, and press firmly for a few seconds. Make sure the surface is dry and dust-free.

Frequently Asked Questions

How long does it take to make a paper mache pinata fish?
Plan for 2–3 days total. Each layer needs 4–6 hours to dry, and you need 3–4 layers. The decorating takes about 1 hour after the body is dry.

Can I use glue instead of flour paste?
Yes. Mix equal parts white school glue and water for a stronger, smoother paste. It dries faster and is less prone to mold, but it costs more than flour.

What is the best balloon size?
Use a 12–16 inch (30–40 cm) round balloon for a standard party pinata. Smaller balloons make a cute table decoration but hold very little candy.

Can I make this with kids?
Absolutely. Tearing newspaper and dipping strips is easy for children aged 5 and up. Just supervise the balloon popping and cutting steps.

How do I hang the pinata safely?
Use a sturdy rope or chain from a tree branch or ceiling hook. Make sure the string is tied to a strong part of the pinata, not just the tissue paper. Test the hang by gently pulling before the party.

What if I don’t have tissue paper?
You can paint the dried paper mache with acrylic paint, or cover it with colored construction paper strips. Both work well, though tissue paper gives the classic crinkly look.

Related

More recipes to cook

Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes

Spotted an error? Tell us and we will correct it (corrections policy).