Walnut pin cushions are a classic sewing accessory that uses the natural shape of a walnut shell to create a sturdy, attractive holder for pins and needles. The hard shell protects the pins and provides a stable base, while the soft filling inside holds the pins securely. This guide will walk you through making your own walnut pin cushion, a practical and charming project for any sewing room.
What You’ll Need
- Whole walnuts (one per pin cushion)
- Small saw or a sturdy knife (to cut the walnut)
- Sandpaper (medium and fine grit)
- Fabric scraps (cotton, felt, or velvet work well)
- Stuffing material (wool roving, polyester fiberfill, or cotton balls)
- Scissors
- Needle and thread (or a hot glue gun)
- Optional: ribbon, lace, or decorative trim
- Optional: small amount of rice or sawdust (to add weight)
Step-by-Step
- Prepare the walnut: Carefully crack the walnut in half along its natural seam. Use a small saw or a sturdy knife to gently cut through the shell if needed. Try to get two clean halves. Remove the nutmeat (you can eat it or discard it).
- Sand the edges: Use medium-grit sandpaper to smooth the rough cut edges of the walnut shell halves. Then use fine-grit sandpaper to polish the surface. This prevents snags on your fabric and gives a nicer finish.
- Cut the fabric: Place one walnut shell half on your fabric and trace around it, adding about 1.5 inches (4 cm) of extra fabric all around. Cut out the circle. You will need one fabric circle per shell half.
- Create the pin cushion pad: Take one fabric circle and sew a running stitch around the edge, about 0.5 inch (1.3 cm) from the edge. Do not cut the thread. Gently pull the thread to gather the fabric into a small pouch.
- Fill the pouch: Stuff the pouch with your chosen filling. For a firmer cushion, use wool roving or polyester fiberfill. For a weighted cushion that stays put, mix in a tablespoon of rice or sawdust with the stuffing. Fill it firmly but not so much that it bulges out of the shell.
- Close the pouch: Pull the gathering thread tight to close the pouch. Secure it with a few stitches and a knot. Trim any excess thread.
- Attach the pad to the shell: Apply a generous amount of hot glue around the inside rim of one walnut shell half. Press the gathered side of the fabric pouch into the glue. Hold it for a few seconds until the glue sets. The fabric should form a plump cushion that sits inside the shell.
- Repeat for the other half: Repeat steps 3-7 for the second walnut shell half.
- Join the two halves: Apply hot glue along the flat, cut edge of one shell half (the rim). Press the two shell halves together, aligning the seams. Hold firmly until the glue dries. The two cushions will now face outward, forming a butterfly-like shape.
- Decorate (optional): Glue a ribbon or lace around the seam where the two halves meet. You can also add a small loop of ribbon to hang your pin cushion.
Common Mistakes
- Cracking the walnut unevenly: If you crack the walnut too forcefully, you may shatter it. Use a gentle, controlled cut with a saw for the best results.
- Using too much stuffing: Overfilling the fabric pouch makes it difficult to fit into the shell and can cause the shell to crack when you press the halves together.
- Not sanding the edges: Rough edges can catch on fabric and cause snags, and they also look unfinished.
- Glue seeping out: Applying too much glue can cause it to squeeze out when you press the halves together, making a mess. Use a thin, even layer.
Tips
- Choose large walnuts: Larger walnuts give you more surface area for pins and are easier to work with.
- Use wool roving: Wool roving is a traditional filling for pin cushions because it naturally contains lanolin, which helps keep pins and needles rust-free.
- Add weight: A bit of rice or fine sand in the filling adds weight, making the pin cushion more stable on your work surface.
- Embellish with felt: You can glue small felt flowers or leaves onto the shell for a decorative touch.
- Make a matching set: Create several pin cushions in different fabric colors to match your sewing room decor.
Troubleshooting
- The walnut shell splits: If the shell cracks into pieces, don’t worry. You can use a single half as a pin cushion by gluing a fabric pad into it and covering the back with felt.
- The fabric pouch won’t stay in the shell: The glue may not be bonding well. Make sure the shell is clean and dry. Use a hot glue gun (not craft glue) and press firmly for at least 30 seconds.
- The pin cushion is too loose: If the fabric pouch is too small for the shell, add more stuffing, or use a larger fabric circle next time. You can also add a thin layer of glue inside the shell before inserting the pouch.
- The seam is visible and ugly: Cover the seam with a decorative ribbon or a strip of fabric. You can also use a thin line of hot glue to attach the trim.
Frequently Asked Questions
Can I use a different nut instead of a walnut?
Yes, you can use any large nut with a hard shell, such as a pecan or a large hazelnut, but walnuts are the most traditional and easiest to work with because of their size and shape.
What is the best filling for a pin cushion?
Wool roving is considered the best because it is dense, holds pins well, and the lanolin prevents rust. Polyester fiberfill is a good, inexpensive substitute.
How do I clean my walnut pin cushion?
You can gently wipe the shell with a dry cloth. For the fabric part, spot clean with a damp cloth and mild soap, but avoid getting the filling wet.
Can I use a pin cushion without a walnut shell?
Yes, you can simply make the fabric pouch and use it as a tomato-style pin cushion. The walnut shell adds durability and a classic aesthetic.
How do I make the pin cushion hang?
Before gluing the two halves together, place a small loop of ribbon between them, with the ends glued into the seam. This creates a hanging loop.
Is it safe to use a knife to cut the walnut?
Yes, but be very careful. A small saw is safer and gives a cleaner cut. Always cut on a stable surface and keep your fingers clear of the blade.
Related
- Paper Mache Pinata Fish: Step-by-Step Guide
- Remembering Japanese American Internment: A Recipe
- Easter Egg Headbands: Fun DIY Recipe
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).