Slick Willy’s Snake Oil is a homemade blade lubricant that keeps knives, scissors, and tools gliding smoothly while protecting against rust. It combines lightweight mineral oil with a touch of silicone for extra slickness, and a few drops of clove oil for a pleasant scent and mild antimicrobial properties. This is a simple, effective blend that outperforms many commercial lubes at a fraction of the cost.
Ingredients
- 1/2 cup (120 ml) food-grade mineral oil
- 2 tablespoons (30 ml) silicone oil (100% silicone, no additives)
- 1 teaspoon (5 ml) clove essential oil (optional, for scent)
- 1 small glass bottle with dropper or pump (4 oz / 120 ml capacity)
Instructions
- Pour the mineral oil into a clean, dry glass measuring cup or directly into the bottle using a funnel.
- Add the silicone oil to the mineral oil. If using a bottle, cap it and shake vigorously for 30 seconds to combine.
- Add the clove essential oil (if using) and shake again for another 15 seconds.
- Transfer the mixture to your storage bottle if you mixed it in a separate container. Use a funnel to avoid spills.
- Label the bottle with the contents and date. Store in a cool, dark place away from direct sunlight.
- To use, apply 2–3 drops to the blade or moving parts, spread evenly with a clean cloth, and wipe off any excess.
Tips
- Substitutions: If you don’t have silicone oil, you can use 100% pure jojoba oil or camellia oil instead. The blade will be slightly less slick but still protective. Clove oil can be replaced with tea tree oil or omitted entirely for a neutral scent.
- Storage: Keep the bottle tightly sealed when not in use. The oils are shelf-stable for up to a year if stored properly. Shake well before each use, as separation is normal.
- Common mistakes: Do not use vegetable or cooking oils—they can turn rancid and gum up blades. Also, avoid over-applying; a few drops are enough. Too much lube attracts dust and debris.
- Application: For knives, apply to the blade and then wipe almost completely dry—the goal is a micro-thin film, not a wet coating. For scissors or tools, apply to the pivot point and work the action a few times.
Serving Suggestions
This lube is perfect for kitchen knives, pocket knives, scissors, pruning shears, and even bicycle chains (though for chains you may want a heavier application). Use it before long-term storage to prevent rust, or after sharpening to keep the edge smooth. It also works well on sewing machine parts and fishing reels.
Variations
- Fragrance-free: Omit the clove oil entirely for an unscented version.
- Extra rust protection: Add 1 teaspoon (5 ml) of vitamin E oil (tocopherol) to the mixture. This acts as an antioxidant and helps preserve the oils.
- Thicker formula: For heavy-duty tools, increase the silicone oil to 3 tablespoons (45 ml) for a more viscous, longer-lasting coating.
- Food-contact safe: If you need a lube for blades that touch food (like a chef’s knife), use only food-grade mineral oil and skip the clove oil (or use a food-grade clove extract). Do not use silicone oil if it may contact food in a way that could transfer.
Storage and Reheating
Store the lube in a cool, dark place (like a pantry or drawer) for up to 12 months. Shake well before each use. If the mixture becomes cloudy or develops an off odor, discard it and make a fresh batch. Do not refrigerate or freeze—cold can cause the oils to thicken and separate more quickly.
Frequently Asked Questions
Can I use this on my chef’s knife that touches food?
Yes, as long as you use food-grade mineral oil and wipe the blade thoroughly after applying. The amount left is minuscule and safe. However, if you’re concerned, use only mineral oil (no silicone or clove) for food-contact blades.
Will this lube go rancid?
Mineral oil and silicone oil are not prone to rancidity. Clove oil is also stable. If you skip the clove oil, the mixture can last even longer. Avoid adding any vegetable or nut oils, which will go rancid over time.
Can I use this on my gun or other firearms?
It’s not recommended for firearms. Firearms need specific lubricants that withstand high temperatures and pressures. This blend is better suited for everyday tools and knives.
How often should I reapply?
For regular use, reapply every few weeks or whenever the blade feels dry. For storage, apply a fresh coat before putting tools away for months.
Is this safe for wooden handles?
Yes, mineral oil is safe for wood and can help condition the handle. Avoid getting the oil on the handle if it’s painted or varnished, as it may soften the finish.
Can I use this on my straight razor?
Yes, it’s excellent for straight razors. Apply a drop to the pivot and a thin film on the blade after use. Wipe off excess before shaving to avoid any residue.
Related
- Turkey Bookmark Corner DIY: Easy Paper Craft
- Janet Collins Winding Path Traditional Furniture
- How to Seal Inside Salt and Pepper Shakers
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).