This yarn wrapped pumpkin garland is a charming, no-carve fall decoration that combines the warmth of yarn with the classic silhouette of pumpkins. It’s a simple craft project that uses basic materials—yarn, cardboard, and twine—to create a festive string of pumpkins perfect for mantels, doorways, or table settings. Because it’s lightweight and customizable, you can easily match it to your existing autumn color palette, and it stores flat for reuse year after year.
Ingredients
- Cardboard (recycled box or cereal box) – enough for 12 pumpkin shapes, about 12 x 18 inches (30 x 45 cm)
- Yarn in assorted fall colors (orange, rust, mustard, cream) – about 20 yards (18 m) per pumpkin, total 240 yards (220 m)
- Jute twine or ribbon – 3 feet (1 m) per garland, or longer as needed
- Scissors
- Hot glue gun and glue sticks
- Pencil or pen for tracing
- Optional: small twigs or cinnamon sticks for stems, felt leaves, or beads
Instructions
- Draw a pumpkin shape on the cardboard. A simple pumpkin is about 3 inches (7.5 cm) wide and 3.5 inches (9 cm) tall, with a slightly flattened top and bottom. Use a pencil to draw a rounded rectangle with gentle bumps on the sides. Cut it out with scissors. This will be your template.
- Trace the template onto the cardboard 12 times (or as many as you want for your garland). Cut out all the pumpkin shapes carefully. You can stack a few layers of cardboard and cut them together to save time, but keep them thick enough to hold the yarn.
- Choose your first yarn color. Place the end of the yarn at the back of the cardboard pumpkin. Apply a small dot of hot glue to hold it in place. Start wrapping the yarn around the pumpkin shape, going around the entire outline. Keep the wraps snug and close together, covering the cardboard completely. Overlap slightly to avoid gaps.
- Continue wrapping until the entire pumpkin is covered. Tuck the yarn end under a few wraps or secure with a dot of hot glue on the back. Trim any excess yarn.
- Repeat steps 3 and 4 for each pumpkin, using different yarn colors as desired. For a cohesive look, stick to a palette of 3–4 colors; for a more playful garland, use a variety.
- Once all pumpkins are wrapped, add a stem. Cut a small twig (about 1 inch / 2.5 cm) and hot glue it to the top center of each pumpkin. Alternatively, use a small piece of cinnamon stick or a rolled piece of brown felt.
- Lay the pumpkins out in the order you like. Take your jute twine or ribbon and cut a piece long enough to span your desired area, leaving extra length on each end for hanging. For a standard mantel, 3–4 feet (1–1.2 m) works well.
- Decide on the spacing between pumpkins—about 2–3 inches (5–7.5 cm) apart looks balanced. Apply a generous dot of hot glue to the back of each pumpkin and press it onto the twine. Hold for a few seconds until the glue sets. Repeat for all pumpkins.
- Let the garland dry completely for about 10 minutes before handling. Then hang it on a mantel, along a shelf, or across a window using small nails or adhesive hooks.
Tips
- Choose the right yarn: Medium-weight (worsted) yarn works best because it covers cardboard quickly and doesn’t slip as much as bulky or thin yarn. If you use a slippery yarn like silk or bamboo, wrap a bit tighter and use more glue.
- Cut cardboard neatly: The smoother your cardboard edges, the easier it is to wrap without lumps. Use sharp scissors and cut slowly. If your cardboard has a corrugated edge, you can cover it with a layer of masking tape before wrapping.
- Secure the yarn well: At the start and end of wrapping, always use a generous dot of hot glue. If the yarn end slips, it can unravel the whole wrap. You can also weave the end under several wraps for extra security.
- Store flat: After the season, gently remove the pumpkins from the twine (or keep them attached) and store them flat in a box. Avoid crushing them under heavy items, as the yarn may flatten or lose its shape.
Serving Suggestions
This garland is a decoration, not a food item, so “serving” means displaying it. Hang it on a mantelpiece with candles and fall leaves, drape it across a buffet table at a Thanksgiving gathering, or wrap it around a stair railing. It also makes a lovely gift for a hostess or a teacher—pair it with a small pumpkin spice candle for a cozy autumn present.
Variations
- Different shapes: Instead of pumpkins, make acorns, leaves, or apples using the same wrapping technique. Just change the cardboard template.
- Add texture: Mix in yarns of different textures—like chunky bouclé, velvet, or metallic—to give the garland more visual interest.
- Embellishments: Glue on small felt leaves, buttons, or beads to the pumpkins before attaching them to the twine. A tiny bow at the stem is another cute option.
- Lighted version: For an evening glow, weave a string of battery-operated fairy lights through the garland, tucking the lights between the pumpkins. Make sure the lights are cool to the touch and not near any flammable materials.
- No-glue option: If you prefer not to use hot glue, you can wrap the yarn and tie the ends in a knot on the back, but it’s more secure with glue.
Storage and Reheating
Since this is a craft, “reheating” doesn’t apply. For storage, keep the garland in a cool, dry place. If you leave the pumpkins attached to the twine, roll the garland loosely and place it in a shoebox or a large zip-top bag. If you remove the pumpkins, store them in a single layer in a container to prevent bending. With proper storage, the garland can last for many seasons. If a pumpkin gets dusty, gently wipe it with a dry cloth or use a lint roller.
Frequently Asked Questions
How long does it take to make one pumpkin? Each pumpkin takes about 3–4 minutes to wrap, depending on your speed and the size. For a garland of 12, plan on 45–60 minutes total, including cutting the cardboard and assembling.
Can I use fabric scraps instead of yarn? Yes, you can cut fabric into thin strips (about 1/2 inch / 1.25 cm wide) and wrap them around the cardboard. Fabric strips may be a bit bulkier, but they give a rustic, quilted look. Just secure the ends with glue as you would with yarn.
What if I don’t have hot glue? You can use craft glue (like tacky glue) or even double-sided tape, but hot glue dries fastest and holds the yarn in place immediately. If using craft glue, you’ll need to hold the yarn in place for a minute or two while it sets.
How many pumpkins do I need for a mantel? For a standard 5-foot (1.5 m) mantel, 10–12 pumpkins spaced 2–3 inches (5–7.5 cm) apart looks full but not crowded. For a smaller shelf, 6–8 pumpkins work well.
Can I make this with children? Yes, but hot glue guns can be dangerous for little hands. Have kids wrap the yarn while an adult handles the glue, or use a low-temperature glue gun and supervise closely. Alternatively, use a glue stick and tie the yarn ends—though it’s less secure.
Can I use real pumpkin stems? Absolutely. If you have access to real pumpkin stems, let them dry out for a few days, then hot glue them to the top. They add a natural, authentic touch, but they may be heavier and require extra glue.
Related
- Toilet Paper Roll Castle: DIY Craft for Kids
- Paper Butterfly Craft: Easy Step-by-Step Guide
- Japanese Styling with Western Furniture: Bayley Wharton Guide
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).