This guide walks you through building a classic papier mache erupting volcano for a science fair. You’ll create a sturdy, realistic-looking mountain from recycled materials, then set off a chemical reaction that produces a foamy “lava” eruption. The project is a staple of science fairs because it combines craft skills with a simple, safe demonstration of an acid-base reaction. Before you start, gather your materials and protect your work surface with newspaper or a plastic tablecloth.
What You’ll Need
- Cardboard or a sturdy base (e.g., a large piece of cardboard or a plastic tray)
- Empty plastic bottle (16-20 oz / 500-600 ml) for the volcano’s crater
- Newspaper strips (about 1-2 inches wide)
- Flour and water (for paste) OR white glue mixed with water
- Masking tape
- Paint (acrylic or tempera) and brushes
- Optional: vinegar, baking soda, dish soap, red or orange food coloring, glitter
- Measuring cups and spoons
- Scissors or a craft knife (adult help recommended)
- Water
Step-by-Step
- Prepare your base: Cut a piece of cardboard or use a tray that is at least 12 inches (30 cm) wide. This will catch the lava overflow and keep your table clean.
- Position the bottle: Place the empty plastic bottle in the center of the base. Tape it down securely with masking tape so it doesn’t move.
- Shape the volcano: Crumple newspaper into balls and tape them around the bottle to form a mountain shape. Build up layers, making the base wide and tapering toward the top. Leave the bottle’s opening exposed—this will be the crater.
- Add more structure: For a smoother, more defined shape, you can wrap strips of newspaper dipped in paste around the crumpled form. This is the papier mache layer. Mix 1 part flour with 2 parts water (or 1 part glue with 1 part water) to make a paste. Dip strips, remove excess, and lay them over the mountain. Cover the entire surface with at least 2-3 layers for strength.
- Let it dry: Allow the volcano to dry completely. This may take 24-48 hours depending on humidity and thickness. Drying thoroughly prevents mold and makes the structure sturdy.
- Paint your volcano: Once dry, paint the volcano with brown, gray, or green acrylic paint. Add details like rocks, trees, or lava streaks. Let the paint dry.
- Prepare the eruption mixture: In a small cup, mix 2 tablespoons (30 ml) of baking soda with a few drops of dish soap and a few drops of red or orange food coloring. Add a little water (about 1/4 cup / 60 ml) to make a slurry.
- Pour into the crater: Carefully pour this baking soda mixture into the bottle using a funnel or a small spoon.
- Add vinegar to erupt: When you’re ready to demonstrate, pour about 1/2 cup (120 ml) of vinegar into the bottle. Stand back and watch the eruption! The vinegar (acid) reacts with the baking soda (base) to produce carbon dioxide gas, which creates the foamy lava.
Common Mistakes
- Using too much water in the paste: A runny paste makes the newspaper soggy and slow to dry. Aim for a consistency like thick cream.
- Not letting it dry fully: A damp volcano will be weak and may collapse. Patience is key—wait until it’s completely hard.
- Making the hole too small: If the bottle opening is too narrow, the eruption may be weak or clogged. Use a bottle with a wide mouth, or enlarge the opening with scissors.
- Adding too much baking soda: A huge amount of baking soda can cause an overflow that’s messy and hard to control. Stick to the recipe.
- Forgetting the dish soap: Dish soap helps create a thicker, more lava-like foam. Without it, you’ll get a fizzy liquid instead of a dramatic eruption.
Tips
- Use a wide bottle: A 20-oz (600 ml) soda bottle works well. The wider the mouth, the more dramatic the eruption.
- Add a little detergent: A few drops of dish soap make the lava foamier and more realistic.
- Practice first: Do a test run before the science fair to see how much vinegar you need for the desired effect.
- Keep extra supplies: Have extra vinegar and baking soda on hand so you can do multiple eruptions.
- Make it look real: Paint the volcano with texture—use a sponge to dab on darker and lighter shades for a rocky look.
- Use a funnel: A funnel makes pouring the baking soda and vinegar much easier and less messy.
Troubleshooting
- No eruption: If nothing happens when you add vinegar, the baking soda may be old or not mixed well. Stir the baking soda slurry again and add more vinegar.
- Weak eruption: If the lava just bubbles over, add more baking soda and vinegar in equal amounts, or use a wider bottle.
- Volcano collapses: If the structure is too weak, it may need more layers of papier mache. Let it dry completely and reinforce with extra tape or newspaper.
- Lava spills everywhere: Make sure your base is large enough to catch the overflow. If not, place the volcano in a shallow tray or baking dish.
- Moldy smell: If the volcano smells musty, it didn’t dry fast enough. In humid weather, dry it in a warm, airy spot or use a fan.
Frequently Asked Questions
- Can I use a different acid instead of vinegar? Yes, lemon juice or citric acid solution also works, but vinegar is cheapest and easiest.
- How long does the volcano take to dry? Typically 24-48 hours, but it depends on humidity and thickness. Check that it’s hard all over before painting.
- Can I use a glass bottle? It’s safer to use plastic, as glass can break if the pressure builds up quickly.
- What if I don’t have dish soap? You can skip it, but the eruption will be more like a fizzy liquid than a thick foam. You can also add a little liquid hand soap.
- Is the eruption safe? Yes, the reaction is non-toxic and safe for kids, but it can stain clothes, so wear an apron.
- Can I make the volcano reusable? Yes, after the eruption, rinse the bottle and let it dry. You can repaint or touch up the volcano and use it again.
Related
- Mindful Martini Night: A Calm Cocktail Ritual
- Leprechaun Paper Puppet: Easy DIY Craft
- Shakers Not Just Style: 5 Cocktail Shaker Recipes
More recipes to cook
Safety notes: safe minimum internal temperatures from USDA FSIS; raw and undercooked fish guidance from the U.S. FDA. Food safety notes
Spotted an error? Tell us and we will correct it (corrections policy).